Search results

the sj pole is wider by a good bit. I am using a 650sx pole bolt on my RN bracket and it just makes it

I was out on a site a few months ago where they were doing some soil testing. Well the guys out there had white plastic gas containers used for holding water that were red on the bottom. I'm talkin snow white and they were only red on the very bottom. It only hit me a few days ago that you could...

a classic YouTube - Broadcast Yourself.

these look like fun toys YouTube - Riverboarding - New Boardsport - Surf the River

My pistons looked the same way on my single carb 62t motor running amsoil, lots of heavy carbon and no real piston wash. You are prob rich on the main jet and or low on your popoff. The single carbs pull on the main jet a little sooner so it can really affect your bottom end. If you rev the...

Cut it inhalf

As far as the pole not going up far enough. If you mod the bracket it will go up farther, but the reason it doesn't go up any farther is it will bind on the cable. I kind of like having the pole being limited as it keeps you from getting lazy and standing straight up all the time.

My contacts used to fall out allthe time when I played football. They would also shoot out when I was lifting. I had my doctor change the size and its been fine ever since. I have only lost one while riding but I constantly have to stop to get them to clear up.

How close are those front mounts to lining up???

I have thought about putting it where the e box is and moving it the ebox up front to a dryer more accessable spot. Or, getting a dry cell and putting it under the coupler. I think 550's have the battery in the back and they are are the most flickable ski out there. Malone does it so it must be...

Its underpadding so who cares. China makes alot of EVA foam for shoes and such so the cost per sheet can't be too high. I have been looking for sheets of it online but without any luck. From what I have seen most of the higher density stuff has to be bought in bulk. One of these days I will be...

Lookin good man. The first one took me about 2 hours to shape then I made a template of it and the second took about 30 min. If you want to save some money on under padding you can buy rolls of low density closed cell EVA foam from camping stores for about $8. The stuff they sell at gander...

fitz rounded his nose, I think paul is working on something based on fitz's ski

http://www.pwctoday.com/showthread.php?t=40078 So far I still like these better than the 24-7's and the WCF's. Having your feet straight rather then like a duck is so much more cofortable. Having an extra $130 isn't bad either.

I did this on my old 650 and adet did it on his fx1. Make sure you sand the foam smooth it sculps like that ******** you stick plants in so you can rough out the shape then hit it up with some 60 grit. When your covering them in glass you have to use epoxy resin or it won't stick. Mock up some...

Wishihada, Try riding the ski at the begining of when you start riding with almost no gas in it. Then once you get warmed up and have put some ride time on it, or you run out of gas, top off the tank. The ski is going to feel slugish but focus more on handleing. If you feel an improvement you...

My blowsion one the bungee fell appart in like 3 days and the plastic thing on the rope pulled out getting towed in. I have a round pole on a square so I had to loop it around the pole so basicaly all mine is is a rope with loops on the ends. The bloswion hood straps break too get a pair of...

wishihada, What are your issues with the 650? The prob I had was the the nose woouldn't dig in at the start of the turn. The nose would also come up in the middle of the turn and the pump would come unhooked.

Pump wedge from an sxi pro will make it all the diff. Prob the closest any kawi will get to an sj as far as handeling is a 650sx with a pump wedge and the stock rideplate. I think a shorter pole/ turnplate would help too.

The bat checks out and the wires check out. I prob burned up the starter trying to get the thing running.:banghead: Its behaving just like there is a loose hot wire but there isn't. I will check the gears tommorow.