Search results

We used 1" flathead stainless screws and washers that were purchased from PeP Boys. Definitely predrill, and as Charlie mentioned, it would be a good idea to drill the cover out larger so the threads do not tap into the cover. Charlie, Crystal is great for the guys, but my Wife and...

That is kick arse... Well done!:cheer:

We want pictures of the new McDonalds color scheme!:cheer:

Why the **** are you in Texas at the Freeride then!:banghead: :Banane37: :trink26: :beerchug: :sneaky:

It definitely looks better on my SJ with a black hull, red topdeck and black hull fittings.:biggthumpup: As Charlie mentioned, it all depends on what the color scheme of your ski is going to be. Grey would not look as nice as black on a pure white ski, etc....

I have grey and black on my red/black square, and IMO the grey looks better.

Who's top deck?

Hi Chic...:sneaky: P cough U cough M cough P cough:biggrin:

Steve is my porting man!:hail:

Agree, this would set off both colors.

probably from the rear bondrail.....:17:

I just removed the top off an old square, and the water wwas getting in from everywhere the factory sealed including all around the firewall (bulkhead). Take your time in de-foaming, and seal everything up real good, or it was all in vain.

I think the cut turf has larger diamonds than the molded turf, so it gives it a different look all together.:27:

I will next time I take the tank out. I don't go far, so it's no biggie to me.:biggrin:

I wouls also cut the fuel filler down a bit, so you are able to fill the tank the tank with more fuel. There is about 2" of the top of the tank that I cannot fill.

3m makes 5200 and home depot has it in the paint department under marine adhesives.

I used the stock seal and the stock screws, but still chose the 5200 it to the top of the tank. It's not like you are going to need to take it off for any reason.:wink:

:biggrin: :Banane01: After lots of thought about what I wanted in a ski, this is the only way to get what I wanted without purchasing a full WF Custom ski. (Which I would have done if the budget allowed). It would have been a lot less expensive to purchase a round nose hull and build from...

Here is another way of doing the mod, and this way both straps will work. We call it the Essefel mod!:biggrin:

Just curious, why did you remove the cooling lines? Thanks Charlie...:woot: