Search results

wow! i mean wtf why do people like this even come on this site if all the are going to do is make $hit comments like a middle school kid. There must be something in the water up there in NJ. WTF

boyer when you gonna put holds in jens ski

trinity holds are the best in my opinion

i had a friend of mine port it already, but i think i will bore it to 81mm. I have the 6m6 pistons and rings they are in very good shape. i haven't measured them but they have an "F" on the top of them. can anybody tell me what the "F" is for?

great choice of music!!

i have a 650(6m6) sitting around and I am wondering how far can i bore it and what mm and brand of piston.

water may have gotten in your tank. i would drain the tank fill with fresh fuel and try again.

x2

I was wondering this same thing, a few weeks ago when hur.bill was here I kept knocking my lanyard off on landing and my ski would die. one time it threw me over the bars.

no he must not have his steering set up right.

mine did that a few weeks ago. the clip that holds the steering cable on the pole bent because my steering stop was not in the right spot.

yes everytime i ride with jjc568 he runs out of gas and i have to tow is azz back in. he rides a 750sx with a single 42mm carb. i run a 701 with dual 44's and i always have gas left.

i love the way it rides, i don't want to change it plus i have never so much as come close to touching it in the water.

team scream motor and carbs, jss electronics, then you will have a ski that you almost never have to work on. ride it flush it park it til next weekend and repeat. Spend the money now too save money in the future. This is my next step

i thought there is a riding area for jet skis only right on daytona beach? i was down there last july and there were flags on the beach that said jet skis only no swimming. is that not there anymore?

pics of my quadrafin

i used a quadrafin that i got off of ebay for 10 bucks. i didn't cut it flush with the hull so it has two points that stick out. it still sticks in turns but slides when i want it to and rides nose high. i like it alot and don't think i will ever go back to the jet dynamics plate

x2

http://cgi.ebay.com/ebaymotors/YAMAHA-WAVE-BLASTER-1994-701-SINGAL-CARB-RUNNER_W0QQcmdZViewItemQQ_trksidZp3286Q2ec0Q2em14QQhashZitem4a9a819fa6QQitemZ320419766182QQptZPersonalQ5fWatercraft found it on ebay, it's cheap so i figured i would post it up.

i used omni paint and clear it is made by ppg. i have also found that if you are painting a kawi or a seadoo don't sand with anything finer than 120grit. i sanded jjc568 750sx with 300 before priming and painting and now his paint peels off. but the spots where we didn't sand very well the paint...