Search results

more

more

more pics

more pics

Okay, here are the pics taken by EXPERIMENTAL the day of the freeride. Lots of pics, hope Jake got everyone in there, I know he did a better job than I did last year, haha. I did note after viewing these that I failed to get any pics of the photographer himself riding his newly dressed "Seal...

And ziptie it shut after fillin it with the dielectric grease

The PB2 "Beach" that is closed is that little cove around the corner that has all the stagnant water in it. We won't be really near that spot. And I consider myself inoculated having been in the lake now for a good 45+ years.

The ground wires (blacks) all join together at one screw junction in the e-box. I also put a redundant ground wire from that point to my motor (came out the heat sensor wire thru fitting), so I wouldn't ever lose the ground.

Yeah I called Art (been working with him a bit on this to rule out carbs as problem) and he said same thing. ARGH!! Oh well, the fix I did was not for nothing, it needed to be done anyway. I just ordered a damn pulse coil, will be here friday (putting it on that night), and I'm also going...

I believe Lou is camping in section 1. The last time I checked there were spots open. Jake (Experimental) and I are coming down Saturday, straight to PB2 launch site (the Pa Hi Tsi ramp).

I JUST MAY HAVE FOUND SOMETHING... I decided tonight to start testing every wire I have on the boat for continuity (tester has a tone setting) - I pulled the stop/start switch open, and I opened the e-box. Began checking the wires from the plugs just outside the e-box to the inner...

Freshwater, Lake of the Ozarks. (sort of fresh I guess, haha) We replaced the head gasket (o-rings) with Protec rings last year. I have another set, I guess I can do it again (sigh). Since then we've replaced the coil/wires/plug ends (all new), new 'lighting' coil (green wires btw), swapped...

Whew that flew right over my head Jake My son the future engineer - :-) (oops - meant to add that radical calculation stuff in first)

You do know what a vinyl wrap is right? He's esentially got a "sticker sandwich" there (sticker on a sticker). Heat may cause him to pull up both the sticker and the wrap material underneath. IMO, I'd go at it really carefully, pulling just a little at a time on the reg. sticker. Or, just...

Post some pics so we can see what you are seeing.

Thanks Gil - will consider that option

I know that. I have had them pop though (the worm drive comes out of the slots). And part of that comes from the rubber of the hose 'squishing up' through the slots.

I'm pretty much sold on the cut-down oem - but anyone know of national retail stores maybe in my area that would have the high strength clamps? I'll use the regular ones but eventually would replace with the stronger ones.