Internal fuel fill mod?

[JayB704]

Just a question, when you do the internal fuel fill mod are you just taking the cap and threaded part from the nose and attaching it to your tank? In so many words....

 

[MADMAT]

Yes. With a nice fresh rubber OEM gasket.

Their should be some pics in here about where to put it so that you can still use both gas tank straps.

 

[michael950]

There is a thread about this specific topic in the FAQ.

 

[JayB704]

Thanks!!

 

[hangtime]

I have a tank done already if you want it:biggthumpup:

 

[LBE]

The search button is your friend!!:skull2:
http://www.x-h2o.com/threads/11288

 

[2lick]

Just a question, when you do the internal fuel fill mod are you just taking the cap and threaded part from the nose and attaching it to your tank? In so many words....

This might help:

http://www.x-h2o.com/threads/497&page=5

 

[michael950]

This might be better:

Post #96 Gas Tank Mod:
Stock Squarenose to Sweet Superjet --- step by step my first ski

 

[demolition_x]

Yes. With a nice fresh rubber OEM gasket.

Their should be some pics in here about where to put it so that you can still use both gas tank straps.

from what i found this seems to be the best option. as much as i don't want to cut a hole in my tank its seems to be the best way.

 

[MADMAT]

I'm not seeing the pics of the way to do it using the stock fuel pick up assembly (in its stock location). I like this way best because not only do you get to use both tank straps but when you pull the tank the front is capped and nothing spills.

 

[demolition_x]

I'm not seeing the pics of the way to do it using the stock fuel pick up assembly (in its stock location). I like this way best because not only do you get to use both tank straps but when you pull the tank the front is capped and nothing spills.

this?

 

[MADMAT]

Thats the one.:biggthumpup:

I love this set up because when I pull my tank all I have to do is pull it out and nothing spills.

I had to pull my tank when it was full a couple if times and I didn't spill a drop.:woot:

 

[2lick]

I'm not seeing the pics of the way to do it using the stock fuel pick up assembly (in its stock location). I like this way best because not only do you get to use both tank straps but when you pull the tank the front is capped and nothing spills.

My way isn't quite like that but it uses all stock parts and 1 extra hose clamp...

When I pull the tank to front is capped as well as the top.... I used only a used gasket and no sealant... no spills yet... guess im just lucky....

 

[MADMAT]

Me too. Just a nice new OEM gasket and no goop cuz I was afraid it might get in to the tank/carbs.

I beat the crap out of my ski and not one drop has spilled yet.

It only took me one time to have to siphon gas out of a tank to decide to go this route.

 

[wydopen]

this?

What was used to cap off the oem fill hole on the front???

 

[wydopen]

What was used to cap off the oem fill hole on the front???

??

 

[oxnard111]

There is a thread about this specific topic in the FAQ.

I love it every time

 

[Crab]

I have a tank done already if you want it:biggthumpup:

Hold that thought, I will know next week if I am going that route.

 

[wydopen]

Hold that thought, I will know next week if I am going that route.

i bought it thats why im asking.....sorry crab..it still needs the stock fill hole sealed though

 

[BlowStuffUp]

blowsion sells a block off kit.

http://www.blowsion.com/detail.asp?PRODUCT_ID=YA96CO151