Search results

10-12 junkies

Why don't you measure your holes yourself? Measure the diameter and pass-through length and then long enough to fit two nuts. xmw bolts might even be too short for that bracket anyway. Good luck.

Word up there should be around ten junkies coming so far w/ almost as many skis and NO couches for a change. :cool2:

Bail? You call that riding? :firedevil: Actually I've come up a couple times to find my ski upside down. If it's running upside down for more than a couple seconds I'm usually getting towed in. I'm not sure if that's due to my one-way releasing the air, my carbs pulling water through my hood...

If you're in the surf, why is your boat sitting? :dunno: This install is going on a boat that's been dripping water through an 1/8" hole for the past three days. The hull is cracked in the bottom left of the transom. The foam was dry two months ago when footwells were installed. I'm hoping...

Thanks jett - I posted in your thread. Sometimes it's a necessary evil.

Great idea! Sorry for the repitition, but just to be clear... you sealed the pvc in place, cut the excess, then sanded (How did you grind it?) down around the rim (1/8"?), applied 3m, screwed on the cd, let it cure, removed the cd (3m doesn't stick?), and trimmed excess glue?

CG Racing. Mike @ HT is a cool guy too.

Is the xmw scupper like the 247 or the wammer? I don't expect to have one in until next week but want to go ahead and do the prep work. In a nutshell, I'm thinking seal a piece of 2" pvc through the hull, trim excess on both ends , then seal the scupper in place? A couple questions: I'm...

Romack, if you still want some 25mm I can cut you a piece.

Looks like a reinforced replica of a stock bracket. UMI? http://blowsion.com/detail.asp?PRODUCT_ID=UYA09000 And now that I think of it, are the xmw bolts long enough to fit through that thickass bracket? That clip on the right is just for looks if you are running a stiff pole. Actually it's...

Torr, I might try and see about getting some of those xmw bolts for Jena's ski. We can try them first on yours if I do. Your pole scares the poop outta me anytime you move it within 50ft of me :bigeyes:

Looks like yall had a blast. Nice shots!

Gelcoat. Gelcoat's for sissies :sneaky:

I looked for that too but then again I sanded that off the sets I've done...

Tubbie ]['s? :dunno:

What kind of ghetto do you live in?? :dunno:

I don't think it is unreasonably loud. But I capped the front of the tee and am running rear only.

XMW or else reinforce a stocker. There's no in between unless you get a killer deal on some other kind of used metal pole.

Well, I had a hole in a carb diaphram, a worn out brand new spigot mount... oh, and I was only getting spark as I let off the start button. Replaced MSD with stock CDI and she fires right up :Banane01: