Search results

I am thinking something along these lines but I am still looking at designs right now

Someone that knows what they are doing could easily fix it , it has to be annealed first to soften it up, you use an acetylene rich, sooty flame to heat up the Aluminum, this softens it so it will bend without breaking.

I had this issue as well, what it ended up being was an exhaust restriction, the short hose from the pipe to the waterbox had delaminated inside, the outside look perfect, when I took it off you couldn't even see daylight through the hose, replaced the hose and it ran like a raped ape.

I am not doing the color scheme it is like that when I get it, like I said a bunch of work has been done already, the bike will end up with a red white and blue Honda racing inspired color scheme like I did on my VT 500 Ascot. I am really digging the red frame though.

So short story time , when I was still in school my brother bought this used Honda CB 200T , I rode the bike a lot and I really liked it, he wanted something bigger and ended up selling the bike dirt cheap , I actually sold it for him. somewhere around 1983 or 1984. For the last couple of...

I will look Saturday but I believe they are at my shop at the lake, if you have the Sherwin Willams code., anyone decent can swap it over. Anyway I did an internet search and came up with this code for you : Pure white.. SHW.. # 366-51436.....YAM # PNT-95WV0-T2-41 Also any decent paint store...

I tried to post one up this morning but the link would not post correctly. This is not the vid I saw but it was the same guy.

Find someone with a hydraulic press , heat it up and make it round again ?

I have also gotten it direct from PPG and sherwin Williams although I cannot in good conscience recommend Sherwin Williams automotive paint, it's crap, I would have to find it but somewhere I have the Sherman Williams paint codes.

L]

62T or 64x , you said 760 but then you said 62T which is a 701? If it is 64x I have a like new 64x stator, a good flywheel and a CDI with the wiring for the electrical box and possibly even the complete electrical box.

Back in December we went out one afternoon to see the Christmas lights in Andalusia, I was in the left lane trying to turn into the place and saw it was barricaded off, so I slowly proceeded to try and find the next left turn, before I could do so I was pulled over by a rookie cop, guy couldn't...

Yamaha Super white , I bought some at a local Advance auto that carries Nason paints and they listed in in the book, it was single stage polyurethane. and it matched very well.

Which equates to 43 PSI , at any rate you want a 0-60 PSI gauge that will cover pretty much anything the highest popoff possible is with a 1.5 needle and a 115 gram spring which is 55 PSI popoff

Maybe he has a yard like mine at the Lake, I have a zero turn but it is quite useless at my other place, a walk behind is the only way to go there.

The Seadoo 787 mount is close but the angle is wrong and the bolt pattern is not wide enough with a Redneck milling machine, AKA a side grinder they could be made to work by notching out the mounting holes and angled the bedplate , at least temporarily they are 2 1/4 inches in height. so you...

Somewhere I have a set of Rhaas shortened mounts I am going to use on my Waveblaster ll but those are only like 1/8" shorter , I have swapped a lot of stuff around but you are correct the JS mounts are the wrong bolt pattern plus 300-440-550 mounts are flat, the 650-750 mounts have a similar...

The X2 is the 57 Chevrolet of the jet ski world, build however you want, it's your money and you are going to be riding it.

Do you use crisco with that auger or something else ?

I have done it before on a small Honda four stroke cylinder but never done it on a two stroke, but I have witnessed it being done The biggest issue with this method is setting up the clearances, the process gets the cylinder really hot and you have to let it cool down then check the clearances...