Search results

As stated earlier a bad heat sensor will cut spark like that , that is exactly how that circuit works, I noticed the Yellow spark plug wires, what kind of wires are they, are they resistor wires, carbon core or are they solid wires , if they are carbon core you have resistor wires, plugs and...

Do you still have the temp sensor hooked up, if so start by unplugging it , it should me a pink and a black wire inside of t and at the moment I would leave the electrical box open unless you like taking out and putting in 400 screws.

I seeing you keep posting vids of running it wide open on the trailer, both here and on Facebook, what does the ski do when you are actually riding it, any ski ever made will hit the rev limiter with the pump unloaded , whether it's on the trailer or jumping a wave that's what the rev limiter...

https://www.bing.com/videos/search?&q=you+never+want+to+go+full+retard&view=detail&mid=865366EA06DCDA393F43865366EA06DCDA393F43&FORM=VDQVAP&

https://www.x-h2o.com/threads/what-killed-the-forum-how-can-it-be-revived.206796/page-4#post-2129906

It is a suggestion based on years of prior knowledge , it does not mean it will magically fix your ski.

NGK resistor boots.

If you keep running it wide open unloaded on the trailer like that you won't have to worry about tuning it. But I will give you a place to start replace the spark plug boots and see if your issue goes away.

I like turtles !

Cometic can make you one https://www.cometic.com/custom

I don't know if they still do it but you used to be able to get prescription lenses for Spex goggles

yep

https://www.discountlifejacket.com/spex-eyewear/ and look up amphibious eyewear on Amazon they have much cheaper options there..

When I was trying to figure this out on a Seadoo trim setup I didn't want to do all the calculous so I asked WETWOLF since his pump cones were pressure operated I thought he would know, he gave me a pressure of 35 PSI which I used to order the trim cylinders I made the POPS trim setups with...

The problem is everyone wants answers and they want them right now, they can't wait and have no patience, I saw it on here just a few days ago, a guy posts up a thread here then he goes to PWCT and posts two more threads over there, I answered him here, he never checked the thread here or...

Wait, you can read about stuff ?

Usually I would say brap but this time I will just say zap !

Sounds like a lean bog, first off how many turns out is the low speed screw ? You cannot adjust for highest idle , that will almost always be too lean, you need to set the low speed where uit is slightly over rich then adjust the idle back up with the idle screw , if you have to go more than...

It's in the back of my truck, I had travel 5 hours one way to get it and let the air out of the back tire to get my work shell doors closed but it's snug as a bug in a rug. It has brand new tires and tubes but the white wheels have got to go ,battery box is under the rear cowling , the paint...

This is the paintjob I did on the VT500 ascot, that's all paint , including the blue pinstripe but not the Honda wing decals and the sidecover and tail decals , all under layers of clearcoat, that's not my bike though, I sold it to a friend some years ago and he put my tank, sidecovers and...