A round nose with tom 21 hood is a sweet ride. The krash reaper is another option in the future for upgrade. They both ride soo good. You won't regret either choice
Turf your waterbox so it doesn't rub and vibrate, because it will rub and vibrate.
I would have used a larger and thicker pole bracket mounting plate on the inside there. Once it starts flexing it gonna start cracking the gel coat and weakening the glass. It might seem tight now but wait till...
I got to ride Taylor Curtis' new 2016 edge in both the surf and at the lake and that hull can do it all. You could compete with it in pro freeride and then ride boat wakes and race bouys with your friends. Rides super straight at full speed in the chop and on glassy water. It carves and turns so...
Put your hood on without latching it and rev the motor. Does it suck down the hood and pull the engine compartment into suction?
You put that vent/air breather right over your carbs
Did you try putting the case bolts in and torque to 11lbs/20lbs ?
Then the bed plates to 17/34
I haven't had to tap cases together.
You have any pics of how you sealed it up?
Was the crank new out of the bag & coated
Wetjet still sells oem parts. I bought a few of their carb gaskets but was disappointed when they were just modified 46mm gaskets. They oblong'd the bolt holes. You can buy that bracket off them though
@BruceSki some people don't know how to make an engine run like some of us do.
Just because you have 93 doesn't mean you will never seize a piston. Gotta have it jetted spot on and have the heat under control. It ain't all about octane.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.