Search results

@bigkahuna is that your wife before I start making jokes?! Lol.... Sent from my iPhone using Tapatalk

Use the washers skat or impros sells. Ditch the stock rubber washer, it doesn't work on the mag and could end up ruining the front seal. If you're cheap and need a washer, cut all the rubber off the stock one and run it. Sent from my iPhone using Tapatalk

I've seen someone do that when I was out on the west coast. It was laying under the carbs bouncing around! Sent from my iPhone using Tapatalk

make sure its not worn out and needs a resize for $125

Your b pipe is probably gonna be in the way of the side mount. Dave was probably running a PFP or TNT pipe

i use a small space heater or halogen lamp to help speed up the cure time. If you get it too hot it runs. You just want to keep it nice and warm. West systems also sells the cabosil. There are different kinds. I use the high strength bonding cabosil that's harder to sand. The soft stuff...

i use epoxy resin/hardner, mix in cabosil to thicken it, and add black dye for color. You can also cut a small piece of carbon or glass to lay over the ufo mount to really secure it in. I wouldn't trust that stuff in a tube to hold down a gas tank.

I thought they didn't have a motosurf race at this years Grayland open? Not easy to do a barrel roll without footholds/strap!!

You use less gas cause you're always up on the beach unsinking your ski [emoji23][emoji23] Sent from my iPhone using Tapatalk

It's cold and I had to wear a hood today [emoji60] Sent from my iPhone using Tapatalk

Sounds like @woodsrider845 is back.. Sent from my iPhone using Tapatalk

http://www.msdignition.com/instructions/Products/4255_instructions.pdf

Yeah a fixed steer is bomb in the surf. Once you learn how to side mount it you'll be out there killing it Sent from my iPhone using Tapatalk

How much does @JetManiac charge? Sent from my iPhone using Tapatalk

I have never seen an allen head with a screw shank

Use an air compressor and blow the water out. Sent from my iPhone using Tapatalk

Pour antifreeze in the top of your head/cooling lines and see what happens. It's just gonna drain out the pump onto the ground. There's no pressure in the cooling lines unless your pump is completely submerged and the prop is spinning.. Sent from my iPhone using Tapatalk

What about his nuts? Sent from my iPhone using Tapatalk

Maybe it's that seadoo pump oil Sent from my iPhone using Tapatalk