Search results

Y'all have too much time on your hands [emoji23] Sent from my iPhone using Tapatalk

That's how much sits in mine from the height of the versaplug . Tip it back at the ramp or on a beachcart. You also can wet vac it Sent from my iPhone using Tapatalk

The versaplug doesn't seal perfect. That might be where water is trickling in when it sits. I don't even have a bilge pump in my ski, just 1 large versaplug. My ski kinda floats when sunk. I don't float around on it or leave it in the water. Has never been a problem the way I ride. Sent from...

I ordered a bunch of those from them. Took a few weeks but it got here. He even sent some extra stuff! Sent from my iPhone using Tapatalk

@IWannaYama That spring you have will work it just needs a little help Sent from my iPhone using Tapatalk

Make sure it doesn't rock front to back with the pole standing up installed. My pole bracket area fiberglass is ready to rip out on my hull. I have a lot of work to fix Sent from my iPhone using Tapatalk

Don't run it without a plate it will rip out Sent from my iPhone using Tapatalk

Their Facebook says they reply within minutes Sent from my iPhone using Tapatalk

Don't over think it. It was either one problem or another. Shaft not in far enough or seal not in far enough. Only takes 1 hammer to solve both!!!! Lol Sent from my iPhone using Tapatalk

Take your tailcone off and press the shaft in further. There's your problem Sent from my iPhone using Tapatalk

The driveshaft might not be all the way in. How far is the shoulder of the driveshaft sticking out past the seal? Get your impeller as close to those stator veins as possible. If you know someone with a lathe they can cut the hub of the impeller all the way to the blades. I even took some metal...

I'll sell you a pump that works @Roseand Sent from my iPhone using Tapatalk

Your mid shaft is probably in the same condition. Male/female. Run them til they strip then replace as a set. Sent from my iPhone using Tapatalk

Those db starters didn't last @Gliderskier and I a week. I found 2 oem freshwater starters on here for 80$. Sent from my iPhone using Tapatalk

Have fun changing 6 starters Sent from my iPhone using Tapatalk

@pinitowinit you're welcome to ride with us on Longisland NY! Hmu. There are lots of spots to check out here Sent from my iPhone using Tapatalk

"Unmodified" mikuni 46's You know my setup and Toms. Sent from my iPhone using Tapatalk

Send me some jetting specs for oem 46's and I'll find out @JetManiac Sent from my iPhone using Tapatalk

I've got over 10 gallons of pennzoil oil/500+ gallons of fuel at 50:1 through my @JetManiac 781 motor since April(9 months) and i haven't had to do a thing to it. Reliable & makes power. Although I wouldnt compare it to a DASA 850. The powervalve motor will walk past it. It definitely makes...

What, you wanna carpool down to Daytona @Ducky ?! Hahha Sent from my iPhone using Tapatalk