Search results

It does but the EDGE's sponson goes all the way around. Here is a link because the website wont let me save the image EDIT here is it

Anyone know if you can buy the EDGE rear sponsons and put them on a EVO

That's the main building at west end

It's Wednesday Bruce

Boner air on the 3rd pic.

Hydroturf.com has precut SN kits. Buy it without the logo on the sides and buy another small sheet so you can do the foot holds

I have a front foot hold and the dash is slanted where it's flat on the inside fire wall.

SS (Stainless Steel). Im just going to make one and glass it into the hull and then put a piece of carbon or glass over it to hide it so you would only see the bolts that the ebox mounts to. Someone on here did that i cant remember who but it came out really clean.

I'm in the same boat as you right. I'm going to be glassing a SS mount to the side of the hull. Even TC recommends it if you're running a B-pipe

If you have an air leak in your case you have a lean condition not rich. More air than fuel equals lean.

If you're hitting an actual 4 footer then you don't even need any of those mods. What do you ride i.e ocean, boat wakes, or flat

Bruce is right. The detail really is nice but if you are going hard it will break. I broke 2 poles in a 2 day period not to mention the pole bracket are is cracking everywhere. This best thing to do is wrap the base in glass or carbon that's where they snap.

He has a 701 with 6 motor mounts that's right 6 lol on a fr2.

Generally no more then 15 secs but if you know nothing about this ski be careful 750s have a crank case drain incase it sinks and they tend to go bad and cause an air leak which will make the engine "run away" check the Tech FAQ about what to do incase it happens

I well if it runs and judging by the mods it's not worthless why don't you give it a test ride

What were you lied to about?

Here's my Carbon hybrid FR2 Evo-1. I just got this right before daytona RRP craftsmanship is top notch. I haven't posted any pics yet so I thought I would start here.

I hope so

I see lots of pics of people using the XFS or the XFR in surf all the time. Here's a pic posted last night of one

I did trying prying. I also Pried another little mount that held the pipe with a strap and that took some carbon with it. I just picked up a scrapper and a thin blade for my multi max looks like this is my only option.