Search results

I will take 1 of the pro tec water filters and 1 of the no name filters shipped to 86426

That looks like the very long grey Blowsion cable I have in my Freak. It’s about 15”longer than it needs to be snakes around because it’s to long but it still works good after 7-8 years of salt use. I don’t know how long it is just it’s grey and from Blowsion and wasn’t cheap.

Good Luck to you. I hope you enjoy linework. If it suits you it can be a lot of fun the day goes by quick when you enjoy it. It’s a dangerous but rewarding job and pays Very well especially if you want to travel,chase storms and or overtime. Young lineman out here in California are making 400k a...

I would post a picture of the inside of your ebox somebody will chime in right away. I use the temperature sensor to power my bilge but I hook the pink wire to the battery side of the solenoid It’s a sealed wire,and you don’t need it anyway works well. I wouldn’t get power off anything attaching...

i bought one of these like 10 year’s ago and it worked well for like 3 months then it quit. I was running it with a TBM flywheel and if I remember they aren’t compatible and getting a warranty was a big hassle so it ended up in the trash and another lesson learned.

Sounds like you need a triple. Probably maxxed out

Same stuff just took along time to get. I also ordered a custom mat from jet trim and got it in like 5 weeks. Might be quicker now idk

I think a 7/14 is the stock equivalent +- and a stock 144 nozzle works with it. I like to match up the pump shoe and the pump tunnel as close possible with a smooth transition so as long as the pump shoe is aluminum you can match it up I would replace a plastic 144 shoe. As much flow to...

Great choice definitely top of the line. I’m sure you will get the perfect setup immediately with no trial and error. Can you share your setup info and specs on the ski?

I have not tried either one of these pumps ^however I have a Maxx setback 148 in my 730cc freak setup for surf with a skat 7/14 cutback 5mm and it performs very very well. I’m sure the Torrent would be awesome too.

Before you buy one try this ^ it’s free and a known cause. The ground connection near the starter has been a culprit.

Wait a minute on second thought the o ring is between the coupler and the collar (sleeve) right ? Maybe someone put it there by accident and that’s what was left over. I have put motors together without the o ring and they ran fine idk

I believe there is an o ring that is supposed to be there.

I think what Tom is trying to point out is water damage. Lol Water leaking in makes pistons look like this. I had a exhaust manifold machined for a 62t cylinder and re time-cert to repair the threads on the cylinder also using a 62t gasket on my big bore because I learned the hard way. Not...

Tomski These pics look like my cylinder after water leaked in from stripped threads on my exhaust manifold using a 61x manifold on a 62t cylinder. Not a good seal anyway and not being tight tight with a Good gasket doesn’t help. keeping the water out is most important. Oil has nothing to do...

Nice ski! a solid surf/rec weapon and like you say it rips already, that prop is an easy fix too.

I will take them. PM sent

FINALLY I got a shipping notification from UPS Hydro-Turf package will be delivered Monday 3/15 it’s been months.

Me Too.