Search results

In the cockpit area, it had the Surf straps fitted, the seat was dropped 4 inches and shortened up by 6 inches. The old steering was removed and dumped in a bin and a Suspension QuickSteer fitted along with a set of Mega-Fat bars and loc -on grips. The Ultimate bilge switch kit was also fitted...

At the rear, it got a Carbon wrapped Transom Plate to stiffen up the rear, a Surf Wedge to deflect water pressure from under the bond line, a rear exhaust with a coloured gasket to not only make it sound good, but to keep the pump area nice and clean. Ofcourse it got the Surf plugs to keep the...

Your ski looks super clean. I could see some serious surf mods going on to it over time. This ski I have done a ground up rebuild for a customer with all the surf mods. Nearly finished, just waiting on a few more decals.

I 100% know you will be blown away at what a few Hundred dollars and 30 minutes of your time has changed your ride. Look forward to your review. Cheers

701 AUS Pilot luke Rotolone is putting together some instructional Videos to give you some insight on how to pull off some freestyle tricks. Here is his first explaining the barrel roll. He makes it look easy.

When developing new products its hard to put time frames on it. The issue is that this seat has to be built in prototype form, then sent out to some test pilots for there feed back, then most likely changes will be made, then look at how to produce this seat to a affordable price. Once all that...

These Surf Straps are now in stock in the ON-LINE SHOP. you can get a set shipped for free if you hurry. Free shipping ends in a few hours. http://www.701industries.com/index.php/store

Having a shorter seat and a bit lower is the key for mounting from the rear. This allows you to hop up on the back deck and grab the bars. Once you have grabbed the bars, you then have balance. With the stock seat, you have to clear the hump first and then reach for the bars. The ski by this...

Im glad you got a little go on it mate. Once you spend more time in the saddle is when you really start to understand how good a improvement they are. The number one issue with you remounting that ski in a hurry is that stock seat. I have currently have put other projects on hold to try and...

I have seen many versions of straps over the years and this is why I needed to bring out a Strap for the freeride Blaster. No other strap in the world has been designed with so many features and purposely manufactured for the Blaster. These straps have been tested by some of Aussies best and...

NEW COLOUR: I have just added a new colour to the range. Its called Lime Green. Im currently doing up a Blaster to show case the Surf Mods and it will be ready for the Queensland event ,the AJSP SURF SLAM in early May. This ski will be painted in a Gun Metal Grey/charcoal colour and will be...

The 701 transom plate and Surf wedge would be a sure fix and at no where near the hassle of using glass. This plate and Wedge can be fitted in less than 30 minutes. The Transom plate will hide any stress fractures, stop them from spreading , and will make your rear super strong. The Surf Wedge...

The number on top of the Surf Box is not the size of the motor.

Ha mate, these QS are set up for Mega Fat bars. 31.8mm. I also sell the best available bars in my shop. If you want to run the smaller 28.6mm bars let me know at time of purchase by email and I will put a set of reducing sleeves in for you. Freight goes by AUS post from Australia to the US. From...

The Burple skis are my favourite ones. They are also the strongest of all the hulls. Yours looks great. I run a 1200 but in my opinion I would keep the twin if surf riding is your main goal. The triples are a lot of fun but to heavy for the surf. If you want a affordable steering system that is...

So I have talked about making the Transom all it can be, and how to make your hood more functional and lock down the cowl way more solid with the HD-Hinge and the importance of having a correct fitting seal. One of the key things you should consider when turning your Blaster into a freeride ski...

The Surf Boxes are available through the ON-LINE SHOP. http://www.701industries.com/index.php/storeA few changes to the design have now been completed. The top box has been lowered and the back side closest to the hull has been given more clearance. This will allow this Surf Box to fit a wide...

Been running this system for years. I have not heard of any issues you have raised. The struts have been used in the automotive industry for decades and for sure, over a long time all things wear out eventually.

The Hood kit is a must. Anyone running a 701IND dual strut kit will tell you, they simply are one of the best hood mods you can do. As you can see the pic below, just the amount of difference they make in having a greater opening and that gives you more room to work on the motor. The ease in...

Im doing this 96 Blaster up for a customer. He wants all the Surf mods on it. The motor is having a full rebuild as well. This will be like a brand new ski when he comes to collect her.