Search results

Got it Drew. Email sent back. Cheers

At the moment there is a package deal where you can buy all the products but its better in my mind to chip away at them so you get to understand and notice the difference as you go. The package as it is at present is about $2500. I sell a lot of these in Australia but the average cost of a...

IN THE HOOD. I want to go over the Surf Mods I recommend for the hood area. When it comes to working under the hood, the factory catch , apart from being awkward, it does not allow the hood to open enough. This is easily solved by fitting a pair of gas struts. The 701Dual Hood kit comes with...

INSTALL GUIDE Follow this install guide when fitting your new Surf Rocker and you will have changed your ride in under 30 minutes. http://ozfreeride.com/index.php?threads/surf-rocker-install-guide.10843/

Having the variety of colours allows you to tie it into the theme of the ski, And doesn't always have to match the rear transom theme. Here is some pics of ones I fitted. There is a few on route to the States now and when you have fitted them please post up your pics.

James Blaster is a stock hull. The bond line was torn off years ago so it has just been repaired only. The motor is basically all you need for the surf, twin carb 701 with a Red Riva pipe and head. James first up will be testing the Quicksteer/suspension and the SurfRocker. James video's all his...

James Rad Visser has decided to be the 701Ind test Pilot in South Africa. James was the World Champion Blaster and Stand-up rider in 2003. His Dad Jimmy is also a legend on a Blaster. Expect to see some awesome videos of James as he puts the 701 Surf Mods to the test.

The Surf Rocker comes with the 6 mounting screws. all you need is a marine sealant and a battery drill. They are super easy to fit. I fitted one on the beach the other day.

3 Months in development and testing have now allow me to bring to the Blaster what I believe is a GAME CHANGER. The flat section across the bow of the Blaster has always been a issue for the Blaster freerider. The only way up until now was to buy a rocker kit, and cut up your Blaster to fit it...

Try and buy the widest bar with a least 2inch rise. There are heaps to choose from. The bar kits I sell in Aus with the QS-S are 740mm wide with a 75mm rise. These are not that easy to find, but there are lots with 50mm rise. Just keep an eye on the width. I would not want to go below 720mm...

Tzane, I have explained on this post about surf mods to a Blaster to make them a better freestyle ski in the surf. I think how you have told the OP your recommendations about all the stuff he wants to get and you didn't have a answer for what he was asking, you should explain your opinions a bit...

The main thing Kurtis you have toughen the arse of your blaster. It looking awesome is a added bonus. Cheers

I don't believe I have ever had a all white ski in. Here is a pic of a red ski .it still had the factory white hull. I know for sure that that colour combo on any ski would look sic.

Ha Carter, are you throwing it over?? or just drinking the beer.lol

His stock arrived today. Try him again. Cheers

With the Surf Plugs, I believe its essential to keep your bilge area as dry as possible. With the ski launching off waves, doing lots of tricks ,flips and rolls, you have a greater chance of sucking water into your carbs with water laying around. The Surf Plugs keeps your bilge dry. 701 has...

The Surf Wedges come in 6 colours ,Red,Black,Blue,Green,Orange and Yellow. Very simple in design ,yet effective, and super easy to fit. Just remove the 5 M6 bolts holding on the black trim. You then fit the wedge by starting at one side , pushing it up and bending it as you go. Knock it all the...

There would be a lot of Blasters that already have rear exhausts, either left or rights. In that situation you get supplied a :non Exhaust Transom plate: Its a case of then doing the measurements yourself and drilling the plate to suit. Never a easy product to drill, but with the right gear and...

WHATS IN A REAR KIT? A full rear kit consists of the SS reinforcement Transom Plate, Surf Wedge, Surf Plugs, and a Exhaust kit. Buying as a package deal sees a discount applied and reducers freight costs. These kits are in stock in all colours and ready to ship. They will set you back $450.00...

BOND LINE CRACK: This is what will happen if you don't take measures to stop it before happens. For sure if your just a rider that doesn't see yourself trying to go as high as you can, you might dodge that sort of crack. I do know for sure your transom will develop stress fractures from surf...