Search results

Gotta keep the ol freaks alive

If you go with a 61x cylinder then I'd do the 718, if you go with a 62t cylinder I'd go to the 735 because the sleeves are thicker on the t cylinder. You can run a .010 base gasket which will increase the compression slightly on the t cylinder. Personally I like the t cylinder because it's a...

Lpw- can do pretty much anything and everything you can think of. I'm running a "shredder" 735 62t/62t engine in my freak. Also purchased the php cylinders and is making his own billet pv cylinders in different stroke. Best part is Paul still rides standups. He's even came to several local nc...

Shouldn't be difficult to modify a set of domes for that stroker crank. Any machine ship should be able to easily modify or make custom domes and a plate for you.

The vision looks sorta superfreakish. If you change the footholds, I'd recommend the adjustable holds from tigercraft or rrp ninja holds. They're easy to install abd even easier to turf. And they're adjustable so no worries on adding too much or not enough padding like on the nonadjustable...

Never ridden one personally but if it's the light blue ski with the 865 and tnt lay down pipe, that's a very solid deal..from what I can tell, the vision looks very comparable in size to the 4.3 badass or v3. I also really like the sv1. Also a great all around ski.

The v3 is a great great surf ski especially for east coast surf. It's in my opinion the perfect all around ski. I'm sure with a 1000ccs or close to it, it is flat water flippable with some skill. Flips off a boat wake with a 701 no problem. The sv1 is also a great hull if you could find one. I...

The v3 is probably the loosest hull I've ever ridden. It is sized almost identical to the 4.3 badass. I've ridden 2 different v3s. Both 701s with the supporting parts. One has a 155 pump thr other a 144 mag. The 144 mag ski is considerably looser than the 155 pump ski.

When it comes to hand laying glass or carbon, I also agree that using multiple layers of a lighter cloth will get better results than trying to use a heavier cloth or twill..6-8oz is ideal. When I first tried doing glass work, I made a few bad decisions due to lack of experience and ended up...

Alright yall, time to trade up from the superfreak to get one of these bad boys. Paint even matches my freak!

This is why you always do a leakdown before you disassemble the engine after it blows up. Now you're just guessing as to if you had an air leak at this point. The other piston honestly looks lean to me. It's easy to.not think about the leakdown after you drop a cylinder. When it happens you can...

The rocker nose on mine did not have a splash guard if you want to call it that. Mine was a round nose and I did add my own splash guard which mimicked his gen 2 nose with the built in guard.. it helped a little but you would still take one to the face on occasion. The picture that wfo posted of...

Yes i absolutely think you will notice an increase in power going to 44s. If you run a stock 44 manifold then be sure to fill the crossover tube..760 carbs will work fine but mikuni 44s without chokes will be easier to tune. The only benefit to the 38s is negotiably better off idle throttle...

Once you ride an aftermarket ski and get comfortable on it you won't ride a superjet for rec riding anymore.. I'm not very familiar with the fs-2 i know it was an earlier model. It will still be a very solid upgrade from the superjet hull. I bought my superfreak as a project and completely...

I used a blowsion sxr spring on my superfreak and cut the top as well. Also had to bend the bottom a little as well. It has a xmetal pole which typically uses pinch bolts but I like the pole spring feel over the tight pole.

I like to make a pole pad out of undermat then turf it and glue it to the hood. You can easily shape the undermat to fit the hood curves for maximum surface contact and adhesion.. I made one for my superfreak that is 6 inches tall and it finally blew off after 2 years glued on and a failed...

A good pole spring will make the pole feel light. Definitely push the poles back up into the bottom pole bracket. I've had much better luck installing those type poles in pieces vs trying to it preassembled. Get the bottom on first, the run your cables up, the then the poles an finally the top...

Were you able to track the molds down? I have a badass -4.3 and I'll say it's the best all around ski I've ridden. Thats just my personal opinion. I'm by no means a great rider but I can just do things especially in the waves on it that I've never been able to do on anything else. It just...

I think that is partly due to there I'd no real money in aftermarket standup jetski hulls. Not enough profit or demand at the end of the day to build hulls. Tem who originally designed and built the superfreaks now builds very high quality carbon offshore catamarans where the profit margin is...

I recently moved into a new house. In going through things, I came across a jetsport manifold that will work perfectly for you. It could use a little cleanup but otherwise in great shape. Shoot me a pm and we'll work something out.