Search results
-
B
FX-1 What to use as spacer for a 144 Cutback Prop on FX-1 shaft?
ok, thanks. i haven't gotten a new set of bearings to rebuild my pump yet. when i initially put the prop on it hit. i tapped the drive shaft forward a bit and it cleared and spun free, but i'm unsure if it will hit when i put new bearings and seals in. thanks for the response. btw, it is a... -
B
x'2 Daytona
hey wadman, did you ever rebuild the big bore X-2 yoou bought off of Pete? The one with the PCM motor? I heard you bought it and was wondering if it came back to life yet. -
B
FX-1 What to use as spacer for a 144 Cutback Prop on FX-1 shaft?
Hello, I've been working on my FX-1 w/ a 144mm pump and SJ pump shoe. I've realized that I'm going to space the prop because the threads on the fx-1 shafts are different. Has anyone spaced this out yet? If so what did you use and what thickness? I know I coud trouble shoot it, but I figured... -
B
Best reeds for 61 x cases
is there a concesus on the best reeds for the 61x cases? They'll be for a ported 760 cylinder w/ a 48mm carb, head, and b pipe. thanks Bern -
B
FX-1 144 in fx-1 pump question
i realize I did it the hard way.. this was kind of a side project i got into while i got away from riding and into other hobbies. i figured if i could get that measurement it could get me in the ball park.. then go about aligning the shaft in the typical manor. once i get it cleaned up i will... -
B
FX-1 144 in fx-1 pump question
if anyone has their ride plate off i would really appreciate this measurement. thanks. bern -
B
FX-1 144 in fx-1 pump question
that's why i cut out the entire area to which the pump she slides into. i cut it out of a beater squarenose i had in the yard. (this also allowed me to drop a SJ intake grate right in) i then ground the pump mounting area flush and built in my own glassed in 'shims' that lift the pump a bit... -
B
FX-1 144 in fx-1 pump question
i am doing this same conversion with the superjet inake. i went the cut and paste method. I basically cut out the pump intake as well as the area that the pump shoe slides into. I then ground the mounting area flat, then went about leveling it off with glass work. my question is... can... -
B
FX-1 FX-1 Blank Templates for Paint?
Does anyone know if a blank template for painting an FX-1 exists ? similiar to these.. http://www.x-h2o.com/attachment.php?attachmentid=76870&d=1234978302 thanks bernie