shes almost done for some surf time!!

[nickt916]

its not much... regular 701 with wiseco pistons, B pipe sitting around, ada 35cc domes, short turn plate, carbon fiber reinforced, dual bilge set up, engine almost there, shortened and painted pole, repainted hood , tubbies... still waiting on the grips, skat trak, intake grate, few other little things...

 

[motorhead10]

nice ski a like how its just really clean looking

well done on the engine paint and reinforcement

go get some :brap::brap: going on

 

[infamy]

looks good.

 

[MADMAT]

Lookin good!

 

[Frosty]

Looks good... like the bilge pump bracket, you make that urself?

 

[justride]

Let's see more pix of the bracket that hold's the pump's in the hull.
I like it!!!

 

[WAB]

The new paint on the motor turned out nice.
I will have to make a bilge pump bracket like that next time I have everthing out of the way. Looks like some of the small 90deg alum strips from hardware store? Great idea :biggthumpup:

 

[wydopen]

bring it down to pismo this weekend

 

[yamaslut]

Looks good... like the bilge pump bracket, you make that urself?

I like it too

 

[oxnard111]

Looks really good. I too like the bilge bracket.

 

[daylite67]

Uh yeah...
I am going to have to agree with everyone else on the bracket.
Great idea!!

 

[yamaslut]

yo nick,

ya got that drawn up???? I would love to have a cad file of that.

 

[Idok]

similar to the blowsion bracket

 

[felix5oh]

Awsome, I've had the same idea for a builge pump bracket just like that. Yours looks really good though.

Right now their held together with a series of tubes and zip ties. I gatta do the driveshaft bearing next week so I'm gonna take the motor out and make my bracket then.

 

[nickt916]

lol the bracket got more attention than anything else, i used a hanger to make the outline then bent the bracket that i got from home depot for like $3 ill put up the outline here in a little

here we go.. its best to use a hanger to make an outline because some jetskis might be a little different, once you got the wire just how you want it then take the bracket and go at it. my bracket is 1/4 off the hull, because after i attached the bilge bracket that are about 1/4 lower than the bracket, so right now both bilge pumps are flush with the floor.

 

[motorhead10]

i also like the bilge bracket....i might have to duplicate that

 

[nickt916]

one word of advice, meassure 7 times cut once :scratchchin:

 

[yankeeboy]

thats one good looking ski, if i do say so myself.

 

[yamaslut]

lol the bracket got more attention than anything else, i used a hanger to make the outline then bent the bracket that i got from home depot for like $3 ill put up the outline here in a little

here we go.. its best to use a hanger to make an outline because some jetskis might be a little different, once you got the wire just how you want it then take the bracket and go at it. my bracket is 1/4 off the hull, because after i attached the bilge bracket that are about 1/4 lower than the bracket, so right now both bilge pumps are flush with the floor.

guess what broke loose riding last week.... :brap:
thanks, I'm gonna try this out...

 

[nickt916]

lol nick are you serious? was ur bilge glued to the hull or what? .... post a pic once you get it in i wanna see