Ghetto Pipe

[djkorn1]

What the hell did this guy do to this FP? It looks like he chopped off the tip and put a coupler on there... Wonder how it runs..:Flush:

 

[ski4]

i know coffmans made a pipe like that. and i f i remember right, so did ffp
both used a resonator and no water box
more hp?

 

[hangtime]

Less weight and more power .I bet that sucker is loud as a mofo .

 

[vomitspot]

it was made from fpp like that it was the 750 mod pipe in the 90s

 

[subseawellhead]

I thought a getto pipe was a coke can, but I now see it is a ski pipe

 

[Mike W]

I thought a getto pipe was a coke can, but I now see it is a ski pipe

:439:

 

[SuperJETT]

Yep, FP 750 mod pipe with silencer on the right. Very loud but high rpms.

 

[w-nut]

yep as said by every one else its a 750 mod pipe . and loud is not the word for it . a friend has one on his sxr

 

[SUPERJET-113]

My friend bought a new FPP pipe for his SXI back in like 96 and that chamber was a center bleed. Must of been a LTD.

So the mod chambers for the 750 look like that??!
I didnt know that.. Never seen one before.

 

[ski4]

yep
and coffmans made a very similar version for the 750 as well

 

[stanton]

I thought a getto pipe was a coke can, but I now see it is a ski pipe

i was thinking aluminum foil uch:

 

[oxnard111]

i was thinking aluminum foil uch:

obviously you haven't seen my 16oz water bottle/aluminum foil combo... :439:

 

[djkorn1]

I have seen a lot of 750 Factory pipe, just not one with the silencer on the right... the ones I always saw had the exhaust come out of the bottom and go back to the stock silencer.

 

[dbrutherford]

I have a chamber like that but have never run it. I have actually seen quite a few lately in the last year. Everyone I ever talked to said they were a top end pipe.

Coffman also had a pipe just like it with a resignator and you remove the water box. A friend had one on a 750 SX. It wasn't too awful loud.

There was also a FPP pipe for a 750 XiR ski. It was a center bleed that looked to the 750 SX mod pipe you guys are thinking of. Basically what a Blaster mod looks like. But it was shaped a little different. I want to get one to try out too.

Just to see which chamber is best. Really they all look the same. A stock piep is as good as a bean can. Any pipe is better than one of those! I can't believe Group K uses a stock pipe on the 850 big bore kit.

DBR

 

[ATS_Aaron]

yep
and coffmans made a very similar version for the 750 as well

A friend of ours had one of those last year. It was LOUD. It got so annoying that we quit telling him when we were going to the lake.

Aaron