Search results

Wiggle cables around...clean all terminals and re-tighten down.

It may work for a minute. Once that water found a way in and out, its going to find it's way right back into the same holes in your foam.... Time to defoam, or at least put in drain plugs until you get through the season.

Rock on, Waste. Stay safe until then and have a great party and ride. :bananalama:

Great Vid! Nice editing... Captures the essence of Oceanside! Love all the wildlife...... What kind of cam?

I actually like the cheap non-sealed ones because they 'drain'. Where as the sealed ones leak and then keep the water in. I just buy the $3.99 ones from the auto parts store... I bought good ones a couple times and they got hit in the parking lot of the boat ramps.

If you use Factory pipe settings, you won't need a carb guy. Just follow the Factory Wetpipe directions.....As far as the screws on the pipe... Bottom: 1/2 turn out Middle: Closed Top: Start at 3/4 turn out and try it and then slowly turn it in (1/16th) after each ride to see where you like...

It jumped between the two wires...right where they were held together...(fired it up at night and sprayed with salt water) Ski was stock except for a flywheel and head. I didn't do any trouble shooting, just bought a new coil after the ride (This was one of the first Jersey Ragers).

ALWAYS! Even in fresh water.... This was years and years ago in my sxi pro...the wires were arc-ing....not sure why. I put an oem coil on and it worked fine. I see alot of saltwater guys are using him now, so maybe it was just a bad piece of wire. I'm sure the issue has been corrected...

Matt has had excellent luck with JSS. My JSS coil worked great for 1 month...then it hit the salt and died immediately. Monkey, I doubt your e-box is the issue...kawi eboxes are pretty bulletproof.... It may be your coil though. I would buy a new oem coil and install that. I haven't...

Why??????

Mine is the glass version...about 75 to 80 lbs lighter....and it's a -2. Yes, it changes the handling! .....big time. I guess this is why all the new aftermarket hulls are now sxr based. With the weight off, they rule.

Huge beach...and good waves if there are Northern Winds around 20 mph....If the winds are Northeast, they are even better like ocean waves. Bring your sxr out. If you want, send me your email address and I'll keep you informed on the wave forecast for cleveland and you can stay updated about...

I may do the Cedar Pt. thing once or twice on flat days.....but thats about it. It looks like the Cleveland Crew is splitting up. Lame. :261:

http://www.x-h2o.com/threads/92357-2006-superjet&highlight= Here ya go, Smurfy. better ask the wife first...hee hee.

ports not chamfered? Did you snag a ring on the port?

Bendix are the same on Kawi's and Yami's, FYI....

Yep...Cleveland Crew rides at Edgewater Park.

:Banane26::Banane26::Banane26::Banane26:

Look for a Freestyle modded used Superjet unless you can find an SXR with an aftermarket light hull. For about $6000, you can get one in prestine shape with a BPipe, footholds, aftermarket handlepole and hood, prop and intake grate. If you buy a stocker and start modding it, you will spend...

Thanks bro. I will.