Search results

100 ft well

I used to make adaptors out of bronze stock when I ran the Jetworks KB35XC batteries years ago.

I usually run and sell Chromepro batteries but they keep in every year I run the YTX20-LBS , crazy part is the 20 is cheaper than the 16 , they have been inching up the prices every year and sooner or later they won't be that great of a deal anymore.

I know a few years back a lot of guys were running these batteries in their skis , so I was looking at some links in my BAMAFREERIDE database and saw these were on sale cheap they measure 7.13 length by 6.59 height by 3 inches width. basically a similar foot print as a Ytx20-lbs , they are...

Throw some pics up so we can see what you are talking about , I know I have seen a thread on here where they removed the whole thing and reglued but you probably don't need to do anything that drastic. It took me a minute but here you go...

Finally got the impeller in for the 3D it was a little dinged up but I ain't scared , I sharpened up the blade and went with a machined finish instead of the dull sandblasted finish before and after , this impeller is a 9 / 21 pitch small hub impeller and I have a brand new brass -aluminum...

If a ski is too loud it is a choice you have made and in certain situations its the wrong choice.

Thing is out of those 37 bad feedbacks most of them were the same as mine parts either took forever to get or didn't show up at all.

Lawn mower blades finally arrived just for curiosity's sake I looked up the seller feedback, 37 negatives in the last year, the problem with Ebay feedback is that mega sellers like these guys still have a 99.4% positive feedback with 37 negatives since it is a percentage it is very misleading...

One of the main holdups on this build was the steering , since it is on the left side it wouldn't work, I had cut the piece the steering cable ball mounted to off and make another one for the other side out of Aluminum stock, I had planned on having it tig welded and I still may but every tig...

These guys are going for it with hydrogen. https://www.jcb.com/en-us/campaigns/hydrogen

JC Superjet posted this curve over on PWCT. https://www.pwctoday.com/forum/technical-discussion/sea-doo/161391-

Dos Equis is fine by me, this Modela light everyone is drinking now though , they can keep that swill !

Still not drinking Bud light but if you have a Corona handy I am game .

Actually I am a master mechanic on both jet skis , Waverunners , Seadoos and most brands of ATVs , your attitude on this thread is no better or worse than mine but you are a master of sarcasm, so you have that going for you. I will say this and I am out , people like you are the ones that...

Yeah you are just a few years behind me, luckily I have mellowed somewhat over the past few years , also I am at the point where I really just don't care anymore.

As BK said Google is a wonderful thing , but the truth is if you were as knowledgeable as you state then you would know that Westcoast never made or sold any heads that didn't have interchangeable domes , even the stock heads they sold were cut to accept interchangeable domes.

damn Dayum , I think you have been reading way too many of my posts lol

Really no way to be sure other than bolting it on and seeing what the compression is , like I said my chart may be wrong and I do not have first hand knowledge to go by.

Then the head listed by Hornedogg79 will work but unless the Westcoast chart I have is wrong it puts you about 205 lbs of compression which is way above what can be run with pump gas , you would need something along the line of 30cc domes for pump gas In simple terms you can't just buy a head...