Search results

Trust me on this, you don't want to wait on me lol.

I am wanting to do an all wood look ski and this would be perfect for that

My thinking on that wide groove is that you would have to put it with the grooves going from left to right to get decent traction, I am not sure how good that would look.

There is a lot of bandwagoning on this site , if you are here long enough you will see a pattern, one guy puts a scupper on , next thing you know everyone has a scupper, then they figure out scuppers leak and then it's don't put scuppers on they sink boats. I saw the same thing happen with...

If you look at Hydroturfs website, click on samples , then click mat foam , then click wide groove , then laser woodgrain, they have it in three colors. , also look at the two tone it has 15 different colors

Next refrain , more of the same , except that I ended up using twice as many clamps this time , go figure. But the good news is the rub rail is really starting to take shape now , at least now I know it will be ridable . I got a really late start today so it will have to cure all night and...

Probably not selling the engine , i have a very nice looking Waveventure 1100 here that needs a motor , my mission till Spring is to build all these skis I have that cost little or nothing in parts to fix and pack the shop at the lake full of skis , then next year sell , sell , sell ! I have...

I made a gauge out of some Aluminum stock that I had to check symmetry, it's low on the left side so I will extend the second piece to that side to cover it, glue it up then grind it back down, the gauge will have to be rebent to fit the new curvature. Remember I said this was thermoformable...

The epoxy hasn't fully hardened yet but it's enough I can unclamp it and go for round two. So before gluing the second piece on I gave it a shave and a haircut.

Straight pipe that Harley and ride it around at 2AM for a couple of weeks , they will soon totally forget about your noisy stand up , follow me for more neighborly advice.

Build what you want, how you want because in the end you are the one riding it.

Yep I sell the YTX 20's for $80.00 and the 30's for $100.00

Sorry for the blurry pic I was in a hurry to get home, it's a galvanized fence staple. I mean who knew I had a whole box of lanyards here and I didn't even know it .

While this was drying I installed some Corvette seats I installed new covers on , then I went to the lake to buy this gem. Hull is crap rear seat base is crap but it has a good hood and the engine is 100% OEM and intact , it spins over freely by hand, the guy said he had started it on starting...

Mixed up cabosil and epoxy to about the consistency of cake frosting and buttered it up, don't try to eat this stuff it looks way better than it tastes. I used a grinder and flap disc and put a long taper on each end so it will blend into the existing rub rail, It will need grinding back and...

So I didn't want to lay up 50 layers of glass here , there is a product called expanded PVC I have used in the past to rebuild bond rails , so I rounded some up, it is also used quite a bit in construction, it is very light , bendable heat formable and glues up very well with epoxy as long as...

I know where one of those is sitting in a junk pile I tried to buy it , he wouldn't sell it. I have two of the Karavan Aluminum trailers here.

What does too much sugar for a dime even mean ?

Looks go0d , tape it off and blow some rattle can paint over it

is jam really ever in a jam ?