Search results

I like the sunkist theme but the orange does not flip my skirt.

The guy hit me back with this , I like it but I may get him to change out the blue for silver.

Did some work on the steering, on the 300SX I drilled a hole through the tube and ran the cable through it so here I did the same, I also drilled and tapped the piece I fabbed up earlier , the ball need to mount a little lower so I got one off of a GP800 which has longer threads, I used a thin...

I actually did that on the STS I built earlier this year. The guys in the second pic will do a color change to purple instead of green at no upcharge I don't think those Blue graphics are gouing to show up well on a teal ski, could be wrong though.

Using a variety of tools I erased the the stock steering cable holder from existance , a hacksaw, vice grips and flap disc on the grinder and a large flat file did the trick, it will have to be relocated but I will be using a 440-550 cable holder and drilling and tapping the hamdlepole to mount...

I could custom paint this but I may not be keeping it so I have to look at it from that aspect. I have found a couple of graphic sets that could work and narrowed it down to these three, yeah yeah I know I have a long way to go before graphics but I would rather go ahead and buy them now...

I use Stabil fogging oil for starting fluid , it uses propane as a propellant and it has oil in it, it works great, its a primer in a can for about $5.00 a can ...

I see you haven't been here that long.

Pennzoil 40:1

F the 180 , I am using 60 grit on the DA as I will be spraying with high build Urethane primer, I was using 80 grit and it was taking way too long , I want some serious tooth to hold the primer on , then the primer will hold the paint on , the way Yamaha did this paint is ludicrous and the...

Sanding, sanding and more sanding , this part sucks. Every damn standup I have done lately has crappy paint that has to be totally removed , BTW this Metton sucks , give me SMC any day of the week over this crap , it sands funky it's messy and it weighs a ton , this is one heavy a$$ pig of a...

...

I have a stack of them here , you can take them apart and replace the o-ring on them and sometimes they will work again but on my skis that have primers I use these , they usually last 4 or 5 years before the bulb wears out. BTW they do seem to last longer on skis that run premix , I am...

On some skis yeah they probably need a primer on yours they don't, I have repaired way to many of those skis where the customer complained that they just would not start or they almost ran the battery down before it started , 99% of the time when retuned they would start without the choke...

I would bolt that power plenum up and see where the jetting is at before messing with anything, it usually leans out a bit so do some plug checks just to be on the safe side.

No I am saying go out 1 1/2 turs from where they are at right now, which is why I said totally disregard the stock settings , yes they are set that lean, trust me.

Don't do it , if you do you will be replacing primers and primer lines every year from now on , all of those skis starting problems can easily be fixed by readjusting the low speed screws and ignoring the factory settings. Turn the low speed screws out about 1 1/2 turns , at this point it...

This will probably be very unliked but you know that's never stopped me before so here it go ' They have to target the middle class, they are the only ones working, the poor people aren't wotking and if they are they don't make enough to be able to tax them, the rich people are not working and...

Maybe just one more BK knows what I am talking about lol