Search results

At this point I am ready for them to just do a hip replacement and be done with it , down time is supposed to be nothing, whatever it is I have spent longer than that on the couch already this year.

Its been really nice here in the morning and late afternoon but yeah middle of the day sucks. I got my Ortho appt, Tuesday , wish me luck.

I ground a vee into the edges with a drum sander on the dremel , taped it off with scotch tape , mixed epoxy and cabosil and pulled it with a business card . Pretty soon it will be just like Servicemaster, like it never even happened.

I made patterns to cut the fiberglass cloth out of posterboard since I have another one to do as well , this mooring I laid up a layer of chop and vacuum bagged it , 3 more sides to go then I am doing the outside part in visual carbon fiber. The hull piece I put back in was a tad high last...

Its finally dry enough to fool with , it's been really cool here for the last few days , I love the weather but the epoxy doesn't . I wanted to sink a chunk of aluminum into the ski for an attachment point, so I did , the piece is probably 3/8" thick , I cut most of the hole out with a...

There is a lot of it out there , the resin I have been using lately is SC110 epoxy resin I get off or Ebay but I saw a link on Facebook the other day and found this, that's a pretty decent price, on epoxy of course the smaller the quantity is the more the markup is , I am going to try some the...

its dry enough to do a quick test fit and it looking damn good ! I will glass that gap in with epoxy resin -cabosil and cloth , it's a nothing..

Absolutly will not work, you could do the whole repair with that resin, let it fully dry then put a screwdriver under the edge and the whole thing will peel off like Bondo on a Bondo spreader. I know buying epoxy resin is expensive but look into one of these products , probably costs about...

Most cloth you get at auto parts stores or Home depot-Lowes is 4 oz, you want cloth mat , it doesn't matter as long as it's cloth and not chopped mat , the resin matters it has to be epoxy or it won't hold.

i finished the shaping on the second piece and I ended up have to curve the piece on the end a bit to get it to fit, I used a ball peen hammer and a trailer ball as an anvil to get the right curvature in it , then I bedded it into the piece with cabosil epoxy. I went ahead and marked and...

I contacted USPS and after a 35 minute wait on the phone hopefully the package is moving in the right direction now.

Well it always worse before it gets better , this is just crazy , I guess it's going all the way back to Buffalo and starting over. I have a call into USOS this morning, waiting on a callback. Sep 29, 2023 3:10am PROCESSED THROUGH USPS FACILITY MINNEAPOLIS MN DISTRIBUTION CEN, 55401 Sep 28...

For a quick fix I would grind it from the inside and taper it toward the outside with a shasllow taper on it going into the old material at least an 1 -2 inches the more the better, then get come cardboard and duct tape or packing tape , cover one side of the cardboard with the tape then tape...

B pipe is the standard and also the most tunable yes , on a 760 or 62T cylinder you will also have to either run nutserts in the exhaust manifold threads to match the size of the 701 exhaust manifold or factory pipe makes a 760 specific manifold that mounts their pipe up to it, either way you...

Not exactly , the Superjet engine is a 62t twin carb engine bottom end and a 61x single carb engine cylinder and head , they use the single carb cylinder because it has lower port timing but yes the complete single carb engine will bolt in and work just fine.

I decided to show my new wing pieces a little love , I say pieces I haven't started on the second one yet. Anyway I found some aluminum plate to put on the bottom and front, I mixed up some epoxy-cabosil and bedded it into that, tomorrow I will do the other piece, then they will be...

I have never seen an issue with it, on vinyl ester or polyester resin it would not be wise because of the styrene , just like the styrene will melt a plastic cup , I suppose if the epoxy got hot enough to melt the wax there could be an issue but if it got that hot you have bigger issues on your...

SO what you are saying is :

I agree

DAYUM