Search results

So I want to talk a bit about what I think went wrong on this paintjob, while I can't say 100% for sure my best guess is that even though I used lacquer paint over lacquer primer , lacquer never really fully cures or it does so very slowly, it also shrinks quite a lot when it cures , lacquer is...

I rode one, one time , I did a lot of swimming, it was a bad day at the lake.

On a Yamaha you are going to have to break open the electrical box , yeah I know it sucks just do it , next unplug the positive wire coming off the starter relay that goes to the fuse , with the battery hooked up touch the bullet connector to the battery post on the solenoid , if it starts bad...

I finished sanding it today and was able to get 99% of it done with the DA but that comes at a cost , DA's are flat take off a lot of paint quickly and they tend to flatten things out , I knew it would be minor and that I could probably get it straightened out in high build primer so I went...

It looks like it handles just like a wetbike, if you have never ridden one prepare to do a lot of swimming.

Unless the ignition is way off backfiring is usually a sign of a lean condition , if it is running lean it won't make full power. The 32T raider - Waveventure engine is something I have a lot of time tuning for different setups. Running lean would also explain your bogging condition , are the...

I don't know that one , like I said I left before they came out and usually you go to service school after you receive the units, it's one of the few certs I don't have..

Wood you ride there ?

...

Remove the plugs, spin it over , does any fuel mist come out, if so it's flooded , spin it over with the plugs out till it clears out , put the plugs back in, turn the gas to off , hold the throttle wide open , spin it over till it starts , if it does start it's time to find out why it's...

Oh ok so it's like applying Dykem and acetone to freshly sprayed gelcoat , once it's all gone you know it's flat, got it.

I have no idea what's going on here

I saw the prototypes at the Mastercraft factory when I went there for Mastercraft school but I changed jobs and went back to the Kawi -Polaris stealership right after the skis hit the showroom so I never got to work on them, I think I have worked on a total of one over all these years , they...

Yes the flywheel is different, the stators are the same.

I had one doing this on a Kawasaki TS before, broken wires as Big Kahuna said , it got progressively worse as it got hotter . I took a razor and opened the wires up to have a look inside , in a section about 12 inches long it was broken in more than ten places. Stock plug wires are crap from...

So your argument is that 3 points of octane fixed your bogging issue ?

Nice setup there

I am going to pull a Superjett and say we decided 4 stroke Superjets are ghey , sorry but it had to be done

One more thing Spraymax is now doing paint in limited colors it is 2k paint in a spray can the same as their clearcoat and primers , you smash the bottom piece on the can to mix it and then spray , for small jobs it should work really well , their primers and clearcoats are also top notch ...

Agreed it looks like it has a 44 or posibbly a 46 SBN , intake , head and a B-pipe , should run really well with that.