Search results

Compression is 185 per hole. Just trying to gauge what the best carb setup is. Wet jet Kraze seems to be a good move at a good price. Sent from my iPhone using Tapatalk

Hmm I would think bigger/better carbs would get priority over a stroker crank Reason being is I could pick up a wetjet intake and carb for relatively cheap and I hear a lot of people swear by them for better throttle response and a smoother power band. I am leaning towards MSD though as it's an...

Would appreciate some advice on what upgrade to do next. I've done most of the popular mods. I mainly ride flat water freestyle/freeride. I have an 03 RN with xmetal pole/steering, blowsion lowered hood, 61x/61x single 44 carb, freshly bored to 82 w/pro-x, threw in a low hour OEM crank, ported...

I have a 2016 Sierra Elevation Sent from my iPhone using Tapatalk

I have an X-Metal bracket and hardware as well. Should I just use that instead? Any difference? Sent from my iPhone using Tapatalk

About to buy an X-Metal pole and was wondering if it'll work with an RRP bracket? And can I use a spring on it? Can't stand a stiff pole. Sent from my iPhone using Tapatalk

Before I became a software engineer, my main job and hobby was graphics design and video editing. Experience with Photoshop, After Effects, Final Cut Pro, Motion, etc. What is it you're looking for exactly? Do you have a design template layout you need converted digitally? Or looking for...

Be patient, I'm sure he'll get around to ya. Maybe he's just busy ATM. Are you buying outright or sending in your core? If you need it done asap I know of someone else who lightens flywheels for about same price. Although I'd hate to give away his business. Sent from my iPhone using Tapatalk

701

According to my expert Google search calculations, here's what I've found: Midshaft/Housing: the SN midshaft itself will swap over but the housing is different. The downside of reusing the SN midshaft is being limited to only older style couplers. Can't use RN couplers or upgrade to, say, Cold...

For a newbie you'd be ahead of the game if you started off with a modded RN hull first while working your way up the power chain. Aside from FWBF'ing you can do all the other tricks on a stock SJ hull anyways. You get the reliability plus it'll make for a way better boat chaser than a cheaper...

If all you want to do is flatwater flip then start by buying a freestyle hull and drop in a 701 till you save up the big bucks. That's what I'd do before dropping a ton of coin on motor mods. I wish someone would've given me that advice off the bat *cough* @Roseand *cough* [emoji57] Sent from...

I'm swapping out everything from my '90 square to a pre '08 hull and wondering what the differences in parts are between the two. Besides midshaft, what else doesn't port over? I recall reading somewhere the steering cable is longer on a roundie. Is this true? Or is that just for '08+? Trying...

You have to post like ~5 times before you can send private messages. @kremm420 I just PM'd him. Sent from my iPhone using Tapatalk

Got my lightened flywheel from #zero last week. Fast shipping, quality packaging and looks damn well brand new. Amazing how much pop you get from shaving off a pound of rotating mass. Just what I needed for that extra low end brappp! Anyways just wanted to leave some positive feedback. Thanks...

How do the plugs look? Doubt you're running on one cylinder since you said it rips hard on the bottom but try throwing on a fresh set, worth a shot. Don't waste your time swapping out carbs yet. Just spray some premix down the carb throat with throttle open and see if RPM spikes. Also check your...

Carbs won't be your issue if it's bouncing off the rev limiter rather than bogging when you give it throttle. Regardless I would definitely rebuild the carbs but first cross out the other 3 points I listed before rebuilding. Maybe post a video to help us determine what's going on. Are you 100%...

Could be a few things. Are you sure you disconnected the right wires? 1. Make sure the timing mark on stator is lined up perfectly with notch on the case 2. Check pulser coil readings are in spec 3. The temp sensor lead on your CDI could be grounded 4. Make sure you have right flywheel/stator...

Ok. But otherwise looks good? And is it cool if I seal it with hot glue or silicone? Sent from my iPhone using Tapatalk

Does this look good? Will this set the limit to 8500rpm?