Search results

the conversion is pretty easy. you will have to slice some off the stock hood to get the correct angle. I just mounted the hood hooks on the bottom side of the pole bracket and it worked perfect. I'm using the Rick Roy bracket. I made a clay mold and then covered that in fiber glass and spent...

Finally finished up my SXR project and now ready to hit the water. round nose conversion removed rear exhaust, now front only lightened stock hull and hood Rick Roy Pole footholds & handholds Fac wetpipe ada head 205lbs domes TBM total loss flywheel/advent ign t3 freestyle porting...

Most guys go with the SJ because they are light and have great bottom end. They have a larger pump stock. I've built a freestyle SXR and it rips hard. My recommendation would be to buy either boat used and hopefully it would have some parts. You'll save thousands!!! I have a lot of money in my...

The "D" cut works great, hardly notice the light front until you ready to use it......do it!!! 04' SXR

I wish they would make an aftermarket light weight hull with gas cap removed. I lightened mine down to 315 and changed the nose, also lowered my stock hood alot. my stock hood is at 15lbs now.

If you are new to it and it's your first standup, I would wait, ride it stock and see if you are into standups for sure. And if you don't have 5grand to spend in the next 2 years then sell your stock 06' for top dollar and buy an 99' with everything on it for 3k or so. My buddy just picked up a...

What size exit is needed? Could you just use the Blowsion side exhaust piece or does it need to bigger?

He also runs his cooling to the bottom of the head pipe instead of the top , I guess it cools quicker for better bottom end, call Wamilton he'll explain it better.

I took my blowsion ones off and now they sit in the garage. I lightened my ski and those things were heavy and seemed to do nothing...

I put my sxr on a diet too. Try slicing up the engine plate a bit, i cut the center out, that probably dropped 2lbs. anything that looks like stainless steel............toss it, i tossed every stainless bracket except the one holding the electrical but i cut holes all over that, cut the bottom...

I love my Rick Roy Pole,I got the dual air tube base tube, total set me back 1,100.00 . I believe they put the rod on the rear just in case someone forgets to tighten properly that nuts which clamps on the tubes, ooch!!! It felt like a tank and at the World Finals I discovered that they made...

Just buy a Rick Roy Pole and never question your length again, although 3 pounds heavier than stock(freestyle concern). Totally adjustable, and a real work of art. I gave my UMI away...

I was running the TBM reed spacers with Tasanari V-force 2 myself until I cracked one of the V-force reed cages. Now I'm running the TBM reeds spacer with an R&D M16 reed, seems to hit well. also running the parts below. ADA girdled head 200psi freestyle porting cylinder bore factory wet...

ok on superjet, to heavy for 800sxr

If you just want stock then look at it very carefully, if your getting into freestyle then disregard everything and insure a clean title since you'll probably be replacing and rebuilding everything, that's when the really fun begins:Banane01: