Search results

hotrod are fine and all new. sbt are rebuilt,some had problem with bearings but crank is welded. up to me? hotrods

epoxy there will not help.

even with big tires ,pensacola/navarre sand is so soft it's still a pain and there's often a ridge where the waves crash that drops 2 to 4ft. everytime i do that i promise myself to build a motorized cart but??? never had a run in with the patrol in pensacola when beaching or starting from the...

klemm does good reliable work.can be mild or wild but if you follow his suggestions you'll end up with a very reliable fast boat.may not be the fastest out there but you'll make it to the finish line to race another day.

the vf3's apparently have less twisting and fluttering of the reeds when opening so should last longer. the light opening breese08 mentions is not detrimental when running as the case pressure seals them shut.

machine the domes for proper squish.usually done to lower port timing.rarely to raise compression as there are better ways to do that.

20mm on all sxipro

talket to att and tech support did something.site came back up for a few days and is now down again. pita.

drop the 64x cylinder some and it'll run just as well as a 61x.a bit stronger casting to boot.

talked to stephanie at sbt and she confirmed at&t blocked them out for some old virus issue apparently. now the isp's dictate what we can access?

xp on one and vista business on other. still no pwc today here.

load it up to maximize bmep in cylinder for better ring seating. vary rpm's but ride it like you stole it once up to temperature.

ditto.

can't access pwctoday from desk top either.been like that for 3 days now.

sure can.

they will also help with crankshaft life.

odd thing is kawi cited less thrust on 2003 compared to 2004 up. 2003 electric wiring is the same as sxi pro.cdi same as sxi pro as well.

bore size will vary on your combo. if you want to retain the factory bilge you will need to epoxy a tube in the hole to recreate the stock setup.

the one i have measures out at 146mm on the outside of the ring so never bored it.used an xft instead. your shoe is fine at 144 or 145 but if you want to send me another one once i bore it to 148 to show what i mean. don't mean to knock your product at all.i'm keeping it for another boat.

plus the xr shoe doesn't open that far without looking like cigarette paper. barely good enough for 144 at best.