- Location
- Michigan
can anyone tell me is a 01 sxi pro driveshaft is a 20mm or 18mm
SX/SXi/SXi Pro drive shaft thread size
- Thread starter cantcount04
- Start date
swannysxr
Site Supporter
- Location
- Lake orion, MI
I,m 99% sure they are 18mm. The sxr ones are 20mm
- Location
- Michigan
im confused ada has 750 listed for the same couplers as the sxr but then they also have a set of couplers that fit only 750 . ski is in storage so hard to look at
swannysxr
Site Supporter
- Location
- Lake orion, MI
I have a few driveshafts from 750 and 650 all are 18mm. but maybe the pro is 20, you'll have to mic it. BTW sweet lookin ski, always liked those graphics. Where you at in Mi ?
- Location
- Michigan
im about 30 min north west of saginaw . midland i usually ride sanford lake
- Location
- Michigan
let me know on the couplers im in the market
- Location
- Arnold MO.
I know that the threads on the coupler have a inner diameter of 18mm on my 02 pro. I measured a bolt I used to remove my stock coupler from the engine. I can double check the driveshaft tonight but I think its the same as the crank.
