Search results

I thought the 64x case just had dual pulse lines for the dual carbs? I'm confused now.

Is there such an animal? I have a set of 760 cylinders that is stamped 62t and fits in a 701 case.

The only cases that will require machining are the 6m6 650 cases and it is very minimal. I think most shops charge around $40 to cut the cases. The 62t sleeves are notched to fit the cases. I have seen notched 61x sleeves notched to fit 6m6 cases. You may have to bore the cases for a 61x big...

The 61x cylinder came on all 701 sj's & fx1's both on single and dual carb models, all have the smaller exhaust. The 62t came in couches with the big exhaust as either a 760 with dual 44's or a 701 with dual 38's. The major difference as it relates to a superjet is the 61x has port timing better...

http://blogs.phillyburbs.com/news/intelligencer/whitewater-release-into-bucks-countys-tohickon-creek-planned/ The Biannual Nockamixon dam release was just announced. I have been dying to ride this. Anyone else want to ride it?

Is this valves open or closed? The stock valves open when you hit the starter.

It looks like Rok's ski has a visibility spout.

I would build a bad ass beach cart.

Like Speed racer said changing the water routing on this motor makes a huge diff. The Factory Pipe costs alot and really doesn't make enough more power to justify the cost. But the newer Factory Pipe on these skis is actually more reliable than the stocker. As far as motor mods go the carb is...

If it isn't already convert it to pre mix. A Mikuni 44mm sbn carb and some more compression really wakes those 650's up. An aluminum water box is also a good mod for the 650's & x2's because you loose a great deal of weight from the nose. 650sx's are the easiest ski to make your own footholds...

Wear a full face helmet.

Is this Brian's yellow 750?

For the price of some enclosed trailers you could buy a mini van or station wagon for the sole purpose of getting your ski to the water. I like being able to tow something else and still have my ski. Also its nice to have it in the bed/trunk if you get done work early. My ideal setup would be...

I did mine even closer than that and its been fine 2 tanks of riding it hard.

Do you need to run a progamable ignition with a stroker?

Merrell water shoes; I've put three seasons on mine and they are still holding up. They have stainless mesh so sand drains out.

Stick with the stock 38mm carb setup and spend the money on something else.

Sounds like he is trying to weezle money out of you. There is no way you could have known that damage was there. The price for that hull is fair even with the cracks. Every hull is going to have cracks. Thats like buying a used motor and complaining about carbon on the tops of the pistons and...

I can see how tubbies would help an 08. They don't want to pop out of a corner like an sxr or sj with tubies does. They just want to carve tighter and tighter, but that is with a stock motor and 240lbs draging in the water next to it.

What rideplate is that?