Search results

I sent them an email about it and they said it won't work with the stock pole on the 08. All you have to do is to drill a hole closer to the center of the nozzle.

Those blowsion cables won't work on the 08 pole. I moved the mount on my steering nozzle as far in as I could get it and it doesn't bind and makes a world of diff. If you can make a bracket to move the cable back 2" into the handpole you will be able to get full throw using athe stock pole with...

650sx bolts work but you can't use the jam nut. I never had any problems with mine coming loose having it tight with no spring.

That crank won't work with stock parts. Ask your builder what parts you should get with a stroker crank. Port timing is going to be altered on a 6mm crank so 62t vs 61x goes out the window. There are a ton of ways to make a stroker work with stock jugs. For example you can have 2.5mm recessed...

That sounds like what I need. I have bolts stuck in the pump shoe I need to drill out too. I know it isn't under powered the base model gti's pull harder out of the hole.

Has anyone tried one of these in an OEM Yamaha 155mm pump? My XL's pump is in great shape and it still cavitates like crazy. I know its a couch but I use it to ski behind. It won't start me out on a slalom ski because of the caviatation. It's also good for taking pictures and making monster...

Some one has got to be pulling flat water backies on a limited setup with trim. I've pancaked my stocker on flatwater by accident a few times and I mean pancaked. Trying I can get as far as getting the nose to hit first. I'm 6'1" 230 there has to be some of you skinny dudes trying them.

I didn't have any fitment issues with mine either. So long as you do a good job cleaning out the old one your golden. You have to use a thin bead of 5200on the hull and install the pump before it sets up. I stuck the 5200 in a tub of hot water before installing it so it would be easier to...

My buddy has one as a daily driver. He's had dozens of bikes through the years and this is the one he held onto(along with 2 rz350's). It's bored ported and piped and sounds awesome.

I wish these were around when i had my square. You guys should make a bracket to mount a 96-07 steering cable on an fx1 or 08+ superjet. It would save alot of people from having to buy a pole to get more steering throw. A quick steer bracket and a CATS type trim kit for the 08+ would be cool too.

Put acetone in a Windex bottle an use a plastic scraper and start on an edge on the sides. Spray the acetone on the turf where its peeling back. With enough acetone and patience you will get the sides off glue and all. The acetone will run down into the bottom of the tray and the bottom will...

$20k! Who on earth would buy that thing? Who would invest their money in developing that?

R&D pipes are nice. I've ridden a few 750's with them and all were fast with as much if not more bottom as your typical 701 Yamaha.

Check it out! http://www.x-h2o.com/threads/46944&highlight=type

Here is another tribute Adet16v found in Philly

Make sure you get one with the linkage type steering. The ones with the other type are pretty much like having no steering at all. A UMI type steering setup is a must with an X2. You will break the stock steering and the adjustment feature on the stock steering feels like the handle bars are...

Does the hood or hull need to be cut with the type 9?

Yeah it will crank you can check compression like that. I've run motors like that with everything hooked up.

There is a lake by me that has a 20hp limit and no recreational towing or swimming because it is considered a safety issue yet they allow windsurfing kite boarding and ice skating. There is also a ban on bikes on all unpaved surfaces. These issues really have nothing to do with the size or...

I saw an 2-3 year old Motobecane FS at a shop by me and it looked real nice. I would say compare it to a Rocky Mountain without the nice paint and maple leaves. The Motobecanes are super cheap for the Components they come with. Most All of the mainstream bikes are built in China by Kinesis any...