Search results

Hilarious!!.........I've been putting jettrim on the 550/750 conversion ski this afternoon as well!

I got some more tuning, ride time, and heat/cool cycles this evening. I Made a restrictor and slipped in the tubing to the stinger water. it's now only a 1/8" hole. I also turned the high screw in a bit, we are now at 1 5/8" turn out. The whole setup seems very happy now with crisp throttle...

I bought this 4 stroke '02 GTX off one of my customers . Her son-in-law had jump started it and blew up all the electronics. It was on a single trailer that I sold. Then recently I bought another one EXACTLY like this off another customer with a bad engine WITH a trailer. It had all the...

It will fit. The stock brace is just a thin piece of stainless that goes from 2 head bolts to the top 4 carb bolts.

No doubt........I tried to buy some Holley carb gaskets recntly.....no-go!

I still have the stock brace on my wife's WITH a Riva open F/A.

Ok guys, I left the main jet alone but upped the pilot/low to an 88. I found some reference to a Factory pipe and that was the recommendation. As it turns out.....that seems perfect for this pipe setup! Starting and idle was vastly improved and seems very dialed in at 11/8 turns out. It will...

Also, it is NOT slow blow. I bought a whole pack of 10A glass fuses at a local NAPA a couple years ago.

Yes, loud click is normally a bad relay. Find the metal ring if you want to use your current start stop switch. Otherwise a new Yamaha one is about $129

Rule of thumb on projects.........always takes 3x as long and costs 2x more than you think!!!

Nice job on that!

I checked out (and cranked on) a flooded WaveVenture 1100. I checked out a '93 Seadoo GTS........has a low end knocking noise......not worth fixing. Checked out a SUPER CLEAN '97 Seadoo GTi that's been sitting for 2 years. Looked at a '99 Seadoo Gti that's not rinning right and...

I finished and reinstalled the Seadoo supercharger. Here it is with fresh paint and new guts.

Good price but I really don't think you can say these things together in context.:D:D:D:D:D Sorry, somebody had to say it LOL!

Today I wrenched on a salty RXPX. After fighting to get the ride plate off to fix leaky fittings......I snapped 5 out of 6 bolts holding the halves together and just stopped. New ride plate ordered. Continued on removing the supercharger for rebuild. I ran it through the blast cabinet, washed...

And here's the carb back apart to verify jetting and try again. Current jets are 155 main and 80 low. I don't think that's stock for anything so probably jetted in the previous SS machine with this R&D flame arrestor. Seeing as how I had to unscrew the idle mixture (pilot/low) screw about an...

Here it is in good company on my trailer with my Tigersaki, and wife's SN Superjet. And proof that it made it's first water test today!...........Unfortunately the water test went about like I thought it would and that pic is as far out into the water as we got! Low speed jetting is too lean to...

Finished up odds-n-ends today. Installed new hood seal.......and FIRED IT OFF!! Honest first start video Pay no attention to the tray mat.....I need something in there to test ride without scuffing up the nice new Jettrim mats. I don't think @Donatello would appreciate that LOL!

I don't envy you linemen....................but thanks!

Tomorrow I'll rebuild the carb, finish up a couple other odds-n-ends, shorten the negative battery cable (it's about 47 feet too long), and HOPEFULLY fire it off!!