Search results

  1. aqua

    ROLL CALL, Who is in?

    im in - SJ + my brother kawi sxi + fountain and his wife will be there also - both SJ's in this post there is 4 of us
  2. aqua

    55 mile river trip on a superjet?

    ski crazy...we should ride from bagnell dam to mari osa. we could get fuel dropped off for us in tuscumbia and st. thomas. total 90 some miles.
  3. aqua

    55 mile river trip on a superjet?

    ive gone between 35-40 miles on a tank before half with current and half against current...i know how many because i mapped it out. this was on ported, piped, 701 with 38's. I bet if you were running where the ski runs effiently you could do 45 miles down current but i think 55 would be...
  4. aqua

    just curious.

    0 degree bars suck. had them and put the ends on two blocks of wood and lowered my truck tire down on top of the middle to give them about 2 degrees. after i realized that wasnt enough i bought some 4 deg bars. take a couple of sticks, pencils, drumsticks, something and put them in your...
  5. aqua

    OD of trim cables?

    I think why there is the confusion is because some use a bicycle style cable while some use a dirtbike style cable. I checked my lever last night and the cable sheath where it meets the lever is 5/16"......i doubt this will fit through a 3/8" tube. the bicycle style cable are a bit smaller.
  6. aqua

    OD of trim cables?

    thanks guys...i ended up buying that one from protec yesterday and was going to go with virgin's cable setup with the steering end on the end of the cable and i found out that it doesnt look like the cable will fit through the protec trim tube. the cable that comes with virgins trim must be...
  7. aqua

    OD of trim cables?

    I am looking at trim tubes and would like to keep the tube as small as possible. What kind of outside diameter on the trim cable am I looking at to run through the tube. A tube I am looking at has .36 Inside Diameter and I dont know if it would be enough. I know the throttle cable is about...
  8. aqua

    Leaning towards an SXI Pro :scratchchin:

    i started out on an sxi pro and now am on my 2nd superjet. if you get a kaw get an sxr.
  9. aqua

    SX/SXi/SXi Pro Fitting a Super Jet RN pole to SXI hull conversion

    wow....pretty cool. cant wait to see it in person.
  10. aqua

    Newbie!!!

    welcome to the x. sj's are fun but sxr's are easier to ride good. you must be part of the linn bunch. probably see you around mari osa, st. thomas, or ketsairs this summer. there are quite a few of us here in mid mo that ride standups lately.
  11. aqua

    Pole spring leanth

    lou......you might try a different after market spring. I have a stock one and a blowsion one. blowsion spring has more angle and push. i put an oem spring in mine the other night and noticed that it seemed to lift even with the pole up but it was definately week. the blowsion spring is...
  12. aqua

    Pole spring leanth

    i know. what i told him was for his xft pole and bracket.
  13. aqua

    Pole spring leanth

    the long side goes into your bracket and the short side goes into the little hole in your handlepole. you have to shave down the longer part so that it doesnt protrude out of the bottom of the bracket......or drill a hole in your hull there so that where it comes out of the bottom it has a...
  14. aqua

    WORX WR205 vs. WR201

    everyone here will tell you to get the 201. it might stay hooked up better in the surf than the 205 but it will dig in when you run onto beach......205 might dig also but not nearly like the 201. i ride flatwater only and i compared the 201 and 205 against each other last year since i have...
  15. aqua

    best 2008 superjet price

    you can get a few hundred off of msrp
  16. aqua

    A+ 3M Pinstripe Removal Wheel-Decal removal-A+ Results!!!!!!

    is this the rubber wheel that looks like it is made out of eraser....if so skicrazy has one and they do work good. no scratches and yes it takes glue off too.
  17. aqua

    24/7 hood hooks

    the 247 hooks that mount to the ski should work with your oem hood hooks. we just mounted some on my friends ski and the hood closed just fine.
  18. aqua

    why is big pump hub better?

    ok. i can understand that it increases velocity and builds more pressure and reloads faster like what wax was saying. but why are we so concerned when the pressure drops and velocity falls as soon as it hits all of the space a reduction nozzle has to offer. by the way our reduction nozzles...
  19. aqua

    why is big pump hub better?

    can someone tell me why a big hub pump is better for freestyle than a small hub. i understand the skat mag pumps have better vanes and better surfaces but why the big hub. everything i have read regarding pumps on the net says that smaller hub would be better to allow for more space so what is...
  20. aqua

    mikekirchner not packing the item properly and got damaged

    no kidding......i hate ups. i just had to make a claim with them for $252 for damage that they made to one of my shipments. im sure they will try to screw me. my buddy has even seen them throwing packages out of the back of the truck. i ship fedex whenever i can.
Top Bottom