Search results

Guy also did a "Raggedy Pancake!"

I believe BK has "no desire for one." If I remember his quote correctly.

While you have it down go ahead and use a bore guage to measure cylinder bore and out of round. As 0 stated you probably need to have the cylinder bored.

I have one on my XFT. They are not indestructible! Mine has a crack between the bolt holes. On the upside...I will have it welded and grind it back down flat. It still works just fine. I have replaced 3 stock plastic ones over the years. When they have gone cavitation is bad.

Riva head is 650/701/760 with 35cc 701 domes. The carbs with the red spigot mount adaptors with 4 bolts are 44mm Mikuni. The carbs with the red spigot mount adaptors with 3 bolts are 38mm Mikuni. The carb with the blue spigot mount adaptor is a 44mm Mikuni on a 61x or 6m6 manifold. Check the...

Westcoast head is a 650/701/760 shell. I believe the domes are 701 at 29cc.

Probably any boat fiberglass repair center will do gel coat. In north Texas I use Harris Fiberglass. Couple years ago I had a Waveblaster done and it was $800 for the hull only. The deck was not gel coated. I currently have my XFT there being done the same way. This one is a trade out so I...

x2 If you get bored look into the cost of materials...color, reducer, catalyst, thinner, hardener, primer, clear, flex additive, sand paper, buffing compound, tape etc. I think you'll find that $300 is probably not even enough to cover materials. If it looks good and sticks, be thankful...

If you are going to freestyle or freeride I would stay away from the Buckshots. They are made for extended WOT runs and race course conditions. They lack low end performance IMO.

Check to see if you have power to the starter relay and the start switch. Also check for a ground to the engine. If you have both, run a temporary ground from the engine or battery to one of the sealing bolts on the electrical box. Also check for continuity(sp?) between the wires to the...

Have had good experience dealing with QuickMick in the past with lodging and swag at the freerides.

Nope, the bolt pattern is different.

Cool! My complaint department is intolerant of any split-tailed fussin'...have her call me.:angryfire: My answer for angry women "You can get glad in the same pants you got mad in!"

Garrett, try raising your voice, if that doesn't work try raising your fist...that should do it!

That's cool, I won't be back in town til Wednesday.

I have a few. Hit me with the height measurement and I'll see if I have what you need.

Thanks Darin, seems to be working now.

I recently performed a system restore on my laptop. After the restore I cannot click a link and arrive there. I get either a yellow star outlined in red or nothing happens at all. What do I need to check for?

Recently did a system restore on my laptop and now I cannot use links. Whenever I try to click a link I either get a yellow star outlined in red or nothing happens at all. I cannot click a link and just go there. B.T.W. It's not so easy a Kaveman can do it!

I remember several years ago some people having them extrude-honed. It was more common on the Kawasaki 750 though. Never heard much about how it performed.