blowsion/wamiltons sxr hull
- Thread starter eastbay
- Start date
- Location
- Jersey
for surf or flat water freestyle?
- Location
- Jersey
don't know of too many people besides the lustics that have used them. i know wamiltons has sold them but i dunno if those people post here and he probably sold a bunch overseas as well
RyanO
X
- Location
- Gold Coast, Australia
just get a CF superjet.
IceRocket1286
Site Supporter
- Location
- Metro Detroit
dont get a CF superjet. the sxr sticks much better, which is why eric maloe uses it. granted your not eric malone, but its the better hull even if the sj is 'looser'
I have an sj also, and if I felt like spending alot more money to make one of my sxr's a freestyle ski, I'd do it over an sj in a heartbeat. Just costs too much right now.
I have an sj also, and if I felt like spending alot more money to make one of my sxr's a freestyle ski, I'd do it over an sj in a heartbeat. Just costs too much right now.
FL-cracker
X-H2O
- Location
- old exit 72 Melbourne
Talk to Bobby at Trinity Composites 321-704-9276... he built Malones 05 WF boat, and the Molds of the new EME boats.... he knows his shiet when it comes to composites.
Or give Kevin Collins a call at 561 281 0547... he has someone testing on his hood and rideplate, and I think will be a dealer for Trinity composites
Right now Bobby has a 7lb hood built to hold up in surf.
A 11oz one piece nose piese.
A 2lb Race ride plate
And some rear sponsons
His boat is stripped and Molds are being made for the upper and lower hull next!
Or give Kevin Collins a call at 561 281 0547... he has someone testing on his hood and rideplate, and I think will be a dealer for Trinity composites
Right now Bobby has a 7lb hood built to hold up in surf.
A 11oz one piece nose piese.
A 2lb Race ride plate
And some rear sponsons
His boat is stripped and Molds are being made for the upper and lower hull next!
Last edited:
- Location
- Cleveland Ohio
If Trinity would have made a lower profile hood with handholds and a different nose piece I would have been all over it. I would rather have the blowsion hood as of right now.
- Location
- Long Beach, CA
I wish they would make an aftermarket light weight hull with gas cap removed. I lightened mine down to 315 and changed the nose, also lowered my stock hood alot. my stock hood is at 15lbs now.
FL-cracker
X-H2O
- Location
- old exit 72 Melbourne
Bobby didnt want to ruin the lines of the stock SXR. I guess its all a matter of opinion, I think the low pro Blowsion hood kit looks kind of funny. Bobby will have a handhold option. From what I have heard the Blowsion hood and nosepiece weighs 16lbs...... the Trinity hood and nose piece weighs 1/2 of that.....7lbs for the hood, 11oz for the nose piece. Probably a big difference in Materials.:biggthumpup:
The stock SXR profile is unbeatable. IMHO...... other then the Handle pole..... Id run a stock Superjet Pole.
Last edited:
SXR-FOREVER
Finally Flippin
- Location
- Lake Minnetonka, MN
Attachments
Legdrag's
X-
- Location
- West Palm Beach
The Trinity hood simply amazing! Hand holds can be drop in about anywhere on the hood. Yes, it has the OEM hood look but the fit and finish of this piece is just wow. & 7.4 pounds! Race hood is around 3.6 pounds!
As far as a “lowered” set up. The SXR pivot point is already as low as you can get it. One of the reasons for the lowered pivot was because of RRoy. He was going to a SquareSJ to a round nose SJ. He didn’t like the leverage it had so they lowered it and made a hood to fit.
As far as a “lowered” set up. The SXR pivot point is already as low as you can get it. One of the reasons for the lowered pivot was because of RRoy. He was going to a SquareSJ to a round nose SJ. He didn’t like the leverage it had so they lowered it and made a hood to fit.
Legdrag's
X-
- Location
- West Palm Beach
Not to get off top topic. Yes, a lightweight SXR is very nice and would love to have one myself & will soon. Even to race! The hull design still keeps the ski hook up but it does "hunt" a bit in the front (just add lead) which is nothing for Freestyle or freeride.
FL-cracker
X-H2O
- Location
- old exit 72 Melbourne
That boat is sick! :biggthumpup: The hood on that boat looks the same as stock though :cool2:
I think you guys will like the internal fuel fill Trinity all in one nose piece..... its sharp!
RiverRat
.......
- Location
- Louisville, Ky
When will Trinty have a website?
- Location
- Sweet Valley, pa
any idea of the price of the nosepiece? i am looking into doing the internal fill (like the look) and the fact i can get a bit more gas in there (without picking the front end up.
SXR-FOREVER
Finally Flippin
- Location
- Lake Minnetonka, MN
I would hate internal fuel fill, way too much work. I like hitting wakes, quickly speeding over to the dock and doing a quick fill and catching the boat again.
