infamy
Westside Freeride
i will be running a ported 760 with dual 44's , ada head 35cc domes, msd enhancer, b-pipe mod chamber, tbm charging flywheel. i will be riding mostly surf. what prop should i be running with this setup?
what prop to use?
- Thread starter infamy
- Start date
- Location
- South Florida
Me too. But call Dave at Impros and he will let you know.
thegoldenboy
RN Surgery... soon
- Location
- Toronto
13/15 might be a bit low. I was told to run a 13/15 for bottom end hit on a limited application.
13/17 might be better for surf, or 12/17.
Nice motor for a surf boat! More than enough juice!
13/17 might be better for surf, or 12/17.
Nice motor for a surf boat! More than enough juice!
surferdude345
X-H
- Location
- Blacksburg for school
i got a 13/16 concord cutback for sale
Pm me
Pm me
- Location
- Grand Rapids, MI
I run 13/16 concord with short cone and bored nozzle. Works great.
norcal ex
X-H2
- Location
- San Jose, CA
you dont want the pitch to low! The pitch on my ski is borderline and it rev out a little faster then I would like.
I ran a 14/18 concord last year and even though all the info on here says it would be too tall it really worked awesome in my setup. I cant imagine a 12/17 having any more low end but likely this year I will jump on the bandwagon and send it to impros be repitched and cut back.
- Location
- HOLLAND MA.
Running Skat 14/18 Cutback With My Old Setup Built 760 Motor,b-pipe.
wydopen
onthepipe
- Location
- Goleta the Goodland
id go a little taller than too low..
Idok
F1pro
- Location
- Nations oldest muthaF+++kin city
skat 12/17 freeride would be where EYE would choose to start
skat 12/17 freeride would be where EYE would choose to start
clever
- Location
- Sherbrooke,Quebec,Canada
I got an solas concord 14/18. I run b pipe, stock carbs with vortex air filter and jetting with the pipe, milded exhaust and base port, intake port are stock. I got a wetwolf pump cone and a r&d grate with ocean pro rideplate. My weight is 130 lbs. Is this the right impeller I had?. What would you use if you was me?I think my impeller do a great job but I never tried others ... and mine is old I will need a new one so I want the best for my setup ... Next mod for the summer that may be important to consider before buying a new prop is a head for 170psi, reeds, and maybe an oversize ... thanks all!
- Location
- Sherbrooke,Quebec,Canada
Anybody can answer me here!? :439:
Mike W
Infidel
- Location
- North Florida
I would have yours repitched to 13/16. With you only being 130lbs that prop would hit hard.
wydopen
onthepipe
- Location
- Goleta the Goodland
also in the surf a lower prop seems to spin more in the whitewater..
- Location
- Sherbrooke,Quebec,Canada
Ok but I'm not doing surf, I'm freestyling on lake so... but by the way, how can I get my impeller repitched? I'm not better to buy a new one 13/16? Thanks!
thegoldenboy
RN Surgery... soon
- Location
- Toronto
send pro to impros for repitching.
impros.com
impros.com
WDKfan
Workin too much
- Location
- Lake Wylie, South Carolina
I have a 13/15 swirl from impros in my ski and it hits pretty hard