The Official Waterdawg Kustomz Technical Thread

thegoldenboy

RN Surgery... soon
Location
Toronto
Everyone is different on this subject.

Personally, WDK has done nothing but good for me. Very helpful with any questions, spent time on the phone. I will buy buying a hull from him when I am ready.
 

DsmRacing

Wannabe Freerider
Location
Tampa
I'm an addict too! However my liking is the FX-1... So, post up everything that you make specific for the FX-1. I've heard of parts that you make, but I don't see them on your website or photos :poke:

Also, can I upgrade your old style steering to the new one?

Thanks,

Chad
 

ski_crazy

ISJWTA member #5
Location
Holts Summit, MO
I purchased rev footholds and hull extensions for my SXI winter project and love them. He took the time to make sure my hull extensions did not have the exhaust cut out in them like I had asked. Maybe some day I can afford to have him build me a hull to fit my size.

Jeff thanks again.
 

Jumper

What! What!
I'm an addict too! However my liking is the FX-1... So, post up everything that you make specific for the FX-1. I've heard of parts that you make, but I don't see them on your website or photos :poke:

Also, can I upgrade your old style steering to the new one?

Thanks,

Chad

I know he makes a hull and deck for the FX1. I think he calls it an "FX1 Pro". He also makes a replacement hood. You can get that in Carbon fiber if you want. I think Mile9C1 had one of the hulls, but sold it before he built it. Someone on here or the other site bought it as I recall.
 
Last edited:
I know he makes a hull and deck for the FX1. I think he calls it an "FX1 Pro". He also makes a replacement hood. You can get that in Carbon fiber if you want. I think Mile9C1 had one of the hulls, but sold it before he built it. Someone on here or the other site bought it as I recall.

the F1 pro

as far as I know, only 2 in existance...maybe 3....


:tapedshut::biggrin:
 

cambo au

TRYING TO LEARN
Location
AUSTRALIA
my dealing with waterdawg have been great parts shipped on time shipping was the right price so were the products i will be definatly doing buisiness in the future
 

DsmRacing

Wannabe Freerider
Location
Tampa
The F1-PRO is bada;$$, but is out of my price range along with the $1K hood. If it ever goes on sale like the diablo's, I'd probably pick one up. I was talking about smaller things, like lowered pole brackets, front hood latch, etc...
 
If my painter would get off his ass its almost done and I need my compressor back. "Damn stoners" It will be done soon LOL Then I shall definitely get pics up I got sidetracked and bought a camaro a civic and a pontiac pheonix. Got one sold one ready for sale and one in the skis shop area so I need to get in gear!! The wifes condition on buying that much ski was making the $$$$ back so Ive been busy!
 

stanton

High on jetskis.
Location
atascadero,ca
i got a hood kit with bracket
the bolts for mounting the bracket were too long, even with my reinforcement and super thick backing plate. i had to cut almost a half inch off the bolts.
the nose peice wouldnt fit on over the pole bolt, had to grind down some fiberglass to get it to clear. one of the through holes for mounting was off slightly.

didnt realize you need to mount the pole in the braket before bolting it down.
the finish of the gelcoat is pretty rough and needs buffing, but i dont care and will probly leave it as is.
the slot for the pole spring is too far from center making it VERY difficult to get the spring on. you gotta stretch the spring longways to get it to fit.
the breather tubes are too long i cut maybe 2 inches off each one.

i think thats it...
 
Top Bottom