rn handlepole bolt question

[fals3illusion]

does anyone know how long and what kind of threading the rn handlepole bolt is ?

i converted from a sn tro a rn poler and couldnt use my longer sn bolt do i drilled out the rn threads and just used one long bolt.

i just bought a umi handlepole breaket due to breaking my stock one and want to do the bolt right.


Thanks guys
Justin

 

[fals3illusion]

anyone i just need sizes so i can go to mcmaster carr and buy the right bolt

 

[fals3illusion]

anyone?

 

[oxnard111]

sorry I don't know the pitch of the threads, but i re used my stock SN pole bolt, cut it to length and re threaded it. Worked great on my RN pole conversion on the square.

 

[fals3illusion]

how did you re thread it? and i think i someone threw ayay my sn bracket and bolt :-(

 

[oxnard111]

how did you re thread it? and i think i someone threw ayay my sn bracket and bolt :-(

with a die... looks like this

I have a square pole bolt for sale. $15 shipped... or you can look for a true round nose bolt, but they are can be expensive new, and are hard to find used.

 

[oxnard111]

Sku: Fx1-6134l-00-00 Shaft, Pivot 1 $38.11

Sku: 90170-14913-00 Nut 1 $3.12

Sku: 92990-14200-00 Washer, Plain 2 $1.83

 

[fals3illusion]

yeah that oem bolt is wayyyy out of my price range ......


i dont wanna spoend about 40 on an oem bolt

 

[accbr]

I couldn't find one on McMaster's site when I was looking. I finally found a used one. You could just run two bolts without a spring until you find one. Its a 14mm pitch thread.

 

[stanton]

Its a 14mm pitch thread.

that would mean theres 14mm length in one revolution of thread.
the pitch is 1.5 or 1.25 im not sure.
M14x1.25 or M14x1.5

 

[accbr]

that would mean theres 14mm length in one revolution of thread.
the pitch is 1.5 or 1.25 im not sure.
M14x1.25 or M14x1.5

You're right. I used the wrong terms. When I looked I could only find 1.5 and 2.0 pitch. Can't remember which one it was though. Take the bracket to Lowe's and try both.

 

[oxnard111]

i want to say it was a 1.25 pitch but can't certain either.

 

[stanton]

if your getting the bolt you might as well get the matching nut. just get the right length....