OEM CDI question X vs. T

[Idok]

so, I have read that it is possbile to make a T cdi work with an X stator by just cutting and resoldering on the M-F connector on the white wire red stripe..

question is, can you tell the difference between that and an actual 61x cdi once its running?

 

[oxnard111]

so, I have read that it is possbile to make a T cdi work with an X stator by just cutting and resoldering on the M-F connector on the white wire red stripe..

question is, can you tell the difference between that and an actual 61x cdi once its running?

Maybe I'm not understanding the problem, but you can already use any cdi with any stator.

Its just flywheel and stators that must be paired.

 

[Idok]

Maybe I'm not understanding the problem, but you can already use any cdi with any stator.

Its just flywheel and stators that must be paired.

nope...


X cdi's have a female terminal on the white/red stripe wire...then the X stator has a male terminal on that same wire

T cdi's have a male terminal, then the stator has a female





they could be vice versa, i dont have it sitting in front of me.....

 

[OCD Solutions]

They are the same, enhancers come with a short adapter to convert, I have a couple laying here if you want one.

 

[Idok]

They are the same, enhancers come with a short adapter to convert, I have a couple laying here if you want one.

you know I never thought about it like that..and I wondered what that little doohicky was for that came with the MSD..

Ill just cut and resolder the connector, no biggie..




thanks, eh

:bump:

 

[WaveDemon]

you know I never thought about it like that..and I wondered what that little doohicky was for that came with the MSD..

Ill just cut and resolder the connector, no biggie..




thanks, eh

:bump:

everyone knows this! :spank:

 

[Idok]

everyone knows this! :spank:

you mean its so easy a caveman can do it?








you know, I think I have acutally done it before.......but it was back before I knew what differences to look for while under power

 

[oxnard111]

nope...


X cdi's have a female terminal on the white/red stripe wire...then the X stator has a male terminal on that same wire

T cdi's have a male terminal, then the stator has a female





they could be vice versa, i dont have it sitting in front of me.....

Ya, you're right. I forgot about that. But besides the different male/female connectors they are compatible. I think I have just spliced and soldered the connection together in a pink before