Nitrous Installed

Location
nebraska
Finally got my mount back from the water jetter, holds nitrous bottle, fuel container & ballistic battery.
All fits where the stock battery was.
It's an 07 superjet, running an 845 group k on pump gas. 30 shot of nitrous (boss noss)working my way up to a 60 shot.
2 days of testing and it works awesome.
 

Attachments

  • mount 2.jpg
    mount 2.jpg
    65.5 KB · Views: 344
  • mount 1.jpg
    mount 1.jpg
    36.3 KB · Views: 322

DAG

Yes, my balls tickled from that landing
Location
Charlotte, NC
winner for the most badass battery tray of 2012. Hope the nitrous gives you what your looking for.
 
Location
SW UT
Sweet setup! I'm gonna be testing a 20hp boost this week from the 10 I was playing with. Why aren't you tapping into one of your fuel lines instead of the separate tank?
 
Location
NW PA
The pressurized fuel line is the little tube running from the bump to the needle section of the carb, he wouldn't be able to tap into that. Scotte you have a separate fuel pump for the nitrous correct? Electric one probably. How do you have it set to some on? I'd set up a spring on the throttle wheel that doesn't do anything up until 95% throttle but then starts adding resistance and the Nitrous would only come on at full 100% power so you could ride around normally without using the nitrous then pull that extra bit harder to activate it.
 
Location
nebraska
Snivilous the separate full tank has 114, mixed 20 to 1. A lot safer.
No full pump, boss system the nitrous pulls full threw the nozzles .
 

Wilke

X2 stole my life
Location
Indialantic, FL
That has to be the most badass battery tray setup I've ever seen, very sweet setup. I'd love to see a with and without video as well. I've always wanted to do a nitrous setup but never had the balls, maybe with you guys paving the way I'll try it out on the next build up. Seems like nitrous could be the poor mans path to flatwater freestyle.
 
Last edited:

McDog

Other Administrator
Staff member
Location
South Florida
I would be interested in hearing how you solved the prop pitch problem. I have always heard nitrous will make a properly pitched prop boil water oryou have to be overpropped for the motor to get traction for the nitrous hit.
 
Top Bottom