Buy 1 on/off switch from Murrays. I glued mine with 'Goop' (also from Murrays) to the start/stop switch, my thumb easily hits it. Tip-The start/stop switch is reversed and rotate so my body doesn't hit it while riding.
5200 adhesive, from any marine store, to glue bilge cage to hull, you need a 'thru hull' fitting from Overtons also.
I located the bilge under the mid shaft, to the left of the battery (batt and batt tray has to come out). I slightly relocated the tray more to the side of the boat and grinded down a corner a bit to fit bilge in this area.
You can see it peeking through, in one of the pics. Once bilge is in, run standard ACO tubing to 'hull fitting'.
---