how hot should b pipe chamber be

[cattledog]

after riding about 15 minutes my chamber is really hot when i put water on it the chamber sizzles and so does coupler the ski runs good is this right my top screw is out 6 turns bottom and middle closed

 

[orangefinger]

6 turns....??

 

[Speedfreak]

If yours are 6 turns out and the pipe is hot then you have a problem. If I had mine 6 turns out the pisser would stop flowing it would all go through the pipe.

I am sure you seen it but read this thread.

http://www.x-h2o.com/threads/38607

 

[pimpchevy07]

i had something cloging my pipe before even with the screw completely out no water came out. i just blew threw it with an air compressor and it fixed it. that might be your problem.

 

[z00m]

yep thats a blocked pipe some where, blow the pipes and all should be well

mick

 

[standupgirl123]

how do you blow out the pipe to get rid of a clog?

 

[Fro Diesel]

sometimes, like after riding cleveland you can get shells lodged in the 90 right at the pump. I know that addict had a shi.t ton of shells in his pump that almost fried his motor.

 

[rollin5150]

WOW, six turns and it is sizzling?? I am 1/2 turn and I am no where near sizzle. Like others stated, you have a clog or restriction somewhere. Also a good idea to remove the adjustment screw and stick a piece of wire through the injection hole. They will get clogged with sand and other small debris.

 

[rocknice2]

I had that problem too. Mine was clogged.

 

[masterblaster]

pull the bottom hose put a stopper in it and blow through the top hose to the head pipe,you will hear the precise amount of flow you have