LIVE2RIDE Powersports
Live & Die 2 Ride
- Location
- WorldWide
So if i run a 2 gal kart tank could i just use any Sj b-pipe, or is the tank not the prob?
FX-1 Fx1 Pipes
- Thread starter rkm
- Start date
- Location
- McCall, ID
Shall I add that with a Superjet tank installed, limited chamber fits.
(it also gave me more room on my Lightning)
(it also gave me more room on my Lightning)
- Location
- Ocala, FL
Anyone use the protec rev pipe? The price is right for a new pipe but hows it compare to others? Would it be better to find a factory pipe?
Also, which pipe is easiest to tune/maintain??
Heres the protec i saw
Also, which pipe is easiest to tune/maintain??
Heres the protec i saw
- Location
- Coal City, IL
Riva Freeride Dry pipe
I just installed a riva freeride dry type pipe in my FX 1 with a little modification to the hood. I had to heat the hood and bend it about 1 1/2 inches to make the pipe fit. Also I had to take the motor mount screws out to pull the motor forward in order for the pipe to be connected to the exhast manifold. It was a pain but it can be done so add that one to the list.
I just installed a riva freeride dry type pipe in my FX 1 with a little modification to the hood. I had to heat the hood and bend it about 1 1/2 inches to make the pipe fit. Also I had to take the motor mount screws out to pull the motor forward in order for the pipe to be connected to the exhast manifold. It was a pain but it can be done so add that one to the list.
- Location
- Ventura County SoCal
I realize this is a shot in the dark due to how old your post is, gut do you own this pipe? If so do you have any interest in selling?
AndyL
Grip it and Rip it
- Location
- Longview, WA
Right on, your going to love that pipe! Watcon had everything I needed for the jets and gaskets at a real good price.
- Location
- Little Rock Arkansas
FX-1 Pipe
Used Pro-Tec MACH-1 Exhaust System 701 yamaha superjet
MACH I Exhaust Systems
MACH I exhaust system features include a newly developed “Balanced Flow” exhaust manifold with ten mounts for added mounting strength and security. Also included is our new wide range “Power Flow Headpipe”. This headpipe features adjustable misting which allows you to maximize torque or top speed performance. This exhaust system hits hard at low RPM and keeps pulling through the entire power band to create dramatic top end speed.
The MACH-1 Exhaust Systems Include: Pro-Tec Balanced Flow exhaust manifold, Pro-Tec Power Flow headpipe, Pro-Tec MACH-1 exhaust chamber, necessary hardware and easy to follow instructions.
When I bought this new I paid $699.95 from Pro-tec, the reason I'm sellingmy pipe is becuse I sold my superjet and selling pipe separate
this pipe is awsome for low end power and punch- had it on my freeestyle superjet, very close to a factory pipe tnt pipe!!! much better low and mid-range than a b-pipe!!!
This is from the ebay add. Take it all with a grain of salt. I know its not a mach 1 because it does not adjustable misting. But it bolted on with out any mods or cutting of any thing. It was a little tight between the pipe and tank. I put a pice of foam between the two to keep it from rubbing a hole in the tank. Its doing good so far. I would have put the pipe on along time ago if I knew the differnce that it made. It does suck the fuel now. If your in Hot Springs anytime stop by a take it for a spin.
Shawn
Used Pro-Tec MACH-1 Exhaust System 701 yamaha superjet
MACH I Exhaust Systems
MACH I exhaust system features include a newly developed “Balanced Flow” exhaust manifold with ten mounts for added mounting strength and security. Also included is our new wide range “Power Flow Headpipe”. This headpipe features adjustable misting which allows you to maximize torque or top speed performance. This exhaust system hits hard at low RPM and keeps pulling through the entire power band to create dramatic top end speed.
The MACH-1 Exhaust Systems Include: Pro-Tec Balanced Flow exhaust manifold, Pro-Tec Power Flow headpipe, Pro-Tec MACH-1 exhaust chamber, necessary hardware and easy to follow instructions.
When I bought this new I paid $699.95 from Pro-tec, the reason I'm sellingmy pipe is becuse I sold my superjet and selling pipe separate
this pipe is awsome for low end power and punch- had it on my freeestyle superjet, very close to a factory pipe tnt pipe!!! much better low and mid-range than a b-pipe!!!
This is from the ebay add. Take it all with a grain of salt. I know its not a mach 1 because it does not adjustable misting. But it bolted on with out any mods or cutting of any thing. It was a little tight between the pipe and tank. I put a pice of foam between the two to keep it from rubbing a hole in the tank. Its doing good so far. I would have put the pipe on along time ago if I knew the differnce that it made. It does suck the fuel now. If your in Hot Springs anytime stop by a take it for a spin.
Shawn
- Location
- Little Rock Arkansas
Idok
F1pro
- Location
- Nations oldest muthaF+++kin city
nice work, dont forget to hook up your bilge overboard 
95FX1
brrrrraaaaaappppppp
- Location
- PHILLY burbs 19401
bump^^
moto how did u run ur cooling lines? do u have 2 inlets on the mani and 2 on the headpipe?
i have the head and mani with 4 inlets and then the stinger and a stock head so one cooling line from there...
whats my options for running the lines...did u dry out ur pipe somewhat?
thanx
moto how did u run ur cooling lines? do u have 2 inlets on the mani and 2 on the headpipe?
i have the head and mani with 4 inlets and then the stinger and a stock head so one cooling line from there...
whats my options for running the lines...did u dry out ur pipe somewhat?
thanx