FX-1 FX-1 Flat Deck Question..
- Thread starter Bern
- Start date
hornedogg79
dodgin' bass boats
It's pretty high.. If you measure from the back of the ski.... the exhaust tube will rise above the tray @ ≈ 15 inches in. So only the rear 15 inches could be decked without exhaust tube mod.
Idok
F1pro
- Location
- Nations oldest muthaF+++kin city
is this bernDOG!?!?!?!?
I can show you picture of where the tube starts, and a measurement from the bulkhead as soon as the identity of the OP is established
I can show you picture of where the tube starts, and a measurement from the bulkhead as soon as the identity of the OP is established
it sure is Idok. looooong time no see man.
thanks for the responses. butti, when you changed the location of the tub, did you also change where it comes through the bulkead of the hull or did you leave a small amount of the gunwall in tact to make a riser with a couple 90 degree elbows to kee the stock local? Idok , if you could track down that pic and post it i would be most intersted in checking it out to have a ball park before i get chop happy.
thanks for the responses. butti, when you changed the location of the tub, did you also change where it comes through the bulkead of the hull or did you leave a small amount of the gunwall in tact to make a riser with a couple 90 degree elbows to kee the stock local? Idok , if you could track down that pic and post it i would be most intersted in checking it out to have a ball park before i get chop happy.
WaveDemon
Not Dead - Notable Member
- Location
- Hell, Florida
tom21 currently has an fx1 in his shop with the tray cut out. You could try to sweet talk him into showing you where the pipe is.
tom21
havin fun
- Location
- clearwater FL
too late we already swapped in a 2 inch pipe. sorry.
Will this help you out? l'll have more foam dug out tonight.Or tell me what you need to see and l'll get a pic of that.
Attachments
chadetroit
Get Wet
- Location
- Bay Area, CA
I've got mine apart and can probably give you a measurement tonight.
