Super Jet Blowsion Catapult Pole Spring

[227]

Not being a fan of the tight pole set up, I ordered a pole spring from Blowsion (about a year ago) When I installed the thing it was sooo strong that even with the bars and chin pad on the pole would stay all the way in the “up” position. At first I was like WTF?? but not wanting to disassemble the whole thing again I just decided to ride it that way. It really didn’t take long and I actually started to like it. (I’m sure many of you will disagree). Any ways I recently ordered another one for my back up ski and its not near as strong as the original. So I’m wondering, did I just get a really strong spring the first time around or did Blowsion start making the springs with a little less strength on there last batch? Any body else get a catapult spring from Blowsion?

 

[bigo]

mines the same i brought mine last year and my pole is alwayz stiff

 

[motoman96]

Got one on my 03, a limiting strap works wonders.

 

[XJCrawler]

tie the pole down and heat it with a torch to take some of the spring out of it. You should be able to get a neutral pole

 

[Tanman]

I put the catapult spring on my full RRP pole n steering set up with blowsion bracket and was like damn that just won't work, so I drilled the blowsion pole bracket's spring hole as far as I could more forward and It made it absolutely perfect. springs about half way up gently and will sit all the way up to open the hood

 

[yamanube]

There seems to be variation when the springs are manufactured, I had one that wouldn't even lift the OEM pole and another that had extreme catapult action. I run the super tight one and just tighten my bolt down slightly and its perfect, stays exactly where I leave it but moves easily.