Custom/Hybrid Another WCF Vision Build

So. I sold my BOB this spring and decided to go with a Vision from Steve at Watercraft Factory. It ships out to me in a couple days (I'm stoked). I am confident the build won't require a grinder (jab-jab). Steve has been great with dealing with all my requests and changes. I'll give credit where it's due and when saw the Carbon hood on rileym21 green vision, I just had to do it too. Below is the setup I am going with and with enough jager and red bull I should have it built in a night...

vision.jpgimage.jpgbuild2.jpgbuild1.jpgbuild3.jpg


Hull:
Vision 2.0 Hull (-4")
Hull Weight (Glass/Carbon Re-inforced) - TBD
Hood Weight (Carbon) - TBD
Hull/Hood Weight - TBD
RTR Weight - TBD


Engine and Electronics (WCF BB770):
ADA Girdled Head
Zero Lightened Flywheel
Jetmaniac Starter
Jetmaniac Midshaft
Billet Flywheel Cover
Billet Intake Manifold
V-FORCE Delta 2 Reeds
Single 48mm NOVI (stock flame arrestor)
JSS Coil, Cables
MSD Enhancer
Deka ETX-9 Battery
Couch Mounts with Kenny Keepers
B-Pipe (mod Chamber)
Jetworks Flow Control Valve
X-Metal Waterbox


Pump:
Solas Mag Pump
Solas Stubby Cone
9/15 hooker (may go 10/16)
Worx 228 Intake Grate
Jetmaniac Driveshaft
Jetmaniac Bored Reduction Nozzle
WCF +4 Carbon Fiber Rideplate


Steering and Handlepole:
RRP Handpole - ( 26" black tubes from Thrust, will probably cut jsut a little)
RRP Steering Sytem
RRP Chinpad Support
RRP Pole Spring mount
RRP Straight Bars
Old BOB Dual Breather handlepole bracket
WCF ChinPad
Stock cut pole spring
UMI Angled Finger Throttle
Blowsion Limiting Rope


Misc Parts:
ADA billet 45 degree oulets
ADA billet bilge oulet
Bilge pump bracket
New OEM hood Seal
RRP hood hooks
Front Foot Hold
Exhaust hose (Peterbilt Radiator Hose)
Stock gas tank with cold fusion internal fuel filler
 

Attachments

  • build4.jpg
    build4.jpg
    68.5 KB · Views: 242

hornedogg79

dodgin' bass boats
Great choice! I've seen three of these in person (blue,orange,&yellow) and they all looked great. Fit n finish was far better than most a/m hulls. Also, all three were being ridden hard by their respective owners. THat's always good to see!
 

Pablo

sqeez bth levrs & lean bk
Site Supporter
Location
georgia
Super clean and sweet looking piece right there. I think u made a good choice. I've been jonesing to try a Vision for awhile now. Congrats.
 

Dmac80sc

Site Supporter
Location
Here
Super clean and sweet looking piece right there. I think u made a good choice. I've been jonesing to try a Vision for awhile now. Congrats.

If you come ride with us you can try out my vision...stock length with 701 and Matts -4 with a 771.
 

Pablo

sqeez bth levrs & lean bk
Site Supporter
Location
georgia
You're not far away. I've been meaning to come down there and ride. I've been invited by some folks but just haven't made it...



Yep!

Most def. We're always up for a ride. Looking forward to the build. Maybe we can hook up a Saturday or Sunday before the seasons over.
 
Rode it today. Rides awesome. Learning curve compared to other hulls I have tried is pretty minimial. Got it inverted on a roll attempt witbout even pinning it. Im looking forward to the next couple weeks.

Got some minor things to deal with. Tghting throttle cable, adding a primer, and limiting rope before going nuts. Will post photos once I resize them
 

Attachments

  • 20130810_205315.jpg
    20130810_205315.jpg
    46.9 KB · Views: 211
pm me your thoughts on hull please compared to BOB....thank you

oh specs on the website

Dimensions and Specs
Length 82 inches
Width 28 inches
Height 36 inches
Fiberglass/carbon re-inforced hull
Weight is 77lbs flatwater and 85lbs Surf/Freeride series
 
Last edited:
pm me your thoughts on hull please compared to BOB....thank you

oh specs on the website

Dimensions and Specs
Length 82 inches
Width 28 inches
Height 36 inches
Fiberglass/carbon re-inforced hull
Weight is 77lbs flatwater and 85lbs Surf/Freeride series

I forgot to weigh it because I wanted to ride it but I'm guessing it weighs in a little less with the carbon hood. I'll write something up on the BOB comparison and post it here and pm you. I'm sure others may find it useful as well.
 
Top Bottom