Search results

Posts like this are why Business's like Jetworks and Blowsion don't bother posting here,I mean why would you waste your time posting for a bunch of cheapskates,if you really think people in this business are making a fortune I invite you to jump in with both feet,after all there are fortunes to...

Pump mold has been popped,she's a beauty,I hate sanding inside pump tunnels so I have some slight patching to do to the mold .Since it will see at least two uses by me I am going to go ahead and reinforce it with plywood and gelcoat it,that way I can spray gelcoat directly on the mold before I...

I am going to go way,way out on a limb and say yes. http://www.x-h2o.com/threads/7680&highlight=300sx

One tip I will give you is to open up the gap on the plugs so that it takes more than one drop of water to ground them out,I have cut the electrodes clean off of plugs to get water out before,the ski will run like crap even after the water is out but it works.

Bearings were ordered today,I should see them here in about three days

Cut back SXR impellor,it rocks

Prob is I believe that was a ported Jetworks stroker ,well at least it was once upon a time.:261:

I will be running a sale on Infract-Away later this month,fo sho you don't want to miss this,If only Pete had bought a can earlier.:fing02:

You are going to need a bearing splitter and a press to remove and install the bearings .:fing02:

Wrestling shoes,I think mine are Aasiacs Matflex,they are holding up very well thus far,wouldn't ride without them.

Or you could cool the engine with one line and the exhaust pipe with the other line,a lot of peeps do it that way.

Sorry to hear about your back,welcome to the X!

We can debate this all day long,I can tell you I have a very large stack of broken cases,cylinders,intakes,ex manifolds etc to take to the scrapyard every year here and its 99% Yamaha stuff in there. I have more blown Yamaha engines in here to build at present that I do Seadoo engines and I have...

Yes before this you had Kawis,welcome to the wonderful world of Yamaha watercraft,isn't it all you ever dreamed of?:1zhelp:

You are the king Cliff!

I trust it about as far as I can throw it ,I have carpal tunnel so I can't throw very far.

Send it in to crankworks and tell them what you want,they will build it for you,two things though,don't be in a hurry because they are usually slammed and they do excellent work but they are not cheap.

Good luck matching up that double row bearing on the front of the crank,not saying it can't be done but it will take some doing to find that one.

Get a thread file,it is a square file with 8 different thread patterns on it,you match up the thread pattern and run the file over the threads till they are straight again,this will take a while but it works like a champ.I know Snap -on ,Mac,Cornwell,Matco and others sell this type file,an...

I find this post to be quite funny as the Nachi brand bearings would be coming from where,yep you guessed it WSM,its the only brand of bearings they sell.:thinkerg: