Search results

I didn't even see that was you who posted that ,my apologies if I hath offended thee.

Pics of the pump tunnel mold as promised ,also some pics of the Styrofoam flotation out of a donor TS.The pump tunnel mold was splashed off of a TS also,it is kind of strange but the TS has a smaller pump tunnel box area than an SX or X2. Thats wax on the first pics of the mold,on a new mold you...

Thanks for the advance warning!

It is the one of the few parts that will interchange,the seals are also the same and the reed pistons will fit in the PP engine.Whoever said no has NO idea

Sorry Matt I fixed it for you.:nana:

Actually the starter clutch is under the rear cover and it has a dipstick to check the oil level with.

Sorry but this is the X, if it is not difficult we will make it difficult!:woot:

Polaris makes a switching device that they used on the bilge pump kits,it uses a sensor wire off one of the charging coil leads,when it senses AC current on that wire it switches the bilge pump on,when current ceases on that wire it switches itself off.I have used these for several applications...

Nope PRO the 300SX has a unique starter clutch similar to those used on street bikes,if I recall correctly pretty much any weight automotive engine oil will be fine in there,usually you can pull the clutch apart and replace just the springs,spring caps and the rollers and it will work fine,if...

I will post up some more pics after the madness is over with this weekend,I freaking hate holidays!

I made one of these tools the other night out of an old touch up paint gun,it literally took a couple of minutes to make the tool and then a couple of minutes each on the two coil wires,I used a small pair of hemostats to pull out some of the remaining wire insulator.I then installed the new...

The stiffie numbers come in about a zillion different fonts ,colors and shadings,they look good and hold up well.check out the ones on my boat J/K ,I was in Navarre beach and I had to have something on the ski for the freeride,those have been replaced with ones from Seadoo which look much better.

To give you a quick answer <yes>:dance:

The fit between the shaft splines and impeller is not ideal thus the pump rattle when the pump is unloaded.Ride it like you stole it.

All I can say is if you guys are having trouble reboarding a ski with riser bars don't even try to ride my shiot.

Is this fad X-H2O approved? I think I will just wait a year or so,it probably won't still be in vogue by then.

I put the foam in this morning,I am going to bore a hole through it for the rear exhaust,and also cut a channel out for the scupper if I actually install a scupper that is,still debating on that one,it looks like some creative heating of the cable run and cooling-bilge tubes will give me...

After viewing many threads and considering many options,one fell into my lap yesterday.I was disassembling a TS that I bought that had blown up,and I mean literally blown up,the ski was almost in two pieces so I decided to finish it off and make it two pieces.When I did two nice pieces of...

Let me ride it I will be glad to test it for you.:smashfreakB:

Yes it is a direct replacement for the Seadoo part,they are fairly heavy