Search results

I just cut a nice little round hole and use SS. button head bolts. Mark44

' I bring nothing XFT-Lou has enough to build an entire ski from ground up. Thanks Lou!:woot: Mark44

and more flexable IMO. Mark44

First thing you need to ask your self what you are going to use it for, I have trim and never use it for anything I just followed the band wagon. Mark44

i You can find these at McMaster Carr. Seal tight connectors. Mark44

McMaster Carr. Mark44

t My youngest sons arm or ask a neighbor kid in your area and give him a buck. Mark44

XFT all the way! Mark44

Just get a dry suit problem solved. Mark44

McMaster Carr bulk head fittings. Mark44

y Interesting I wonder why? Mark44

p Sounds like you need the best all around KTM that would be the 200. Check out KTMtalk.com Mark44

Would be a good time to think about ceramic bearings. Mark44

o Yes you did because they wouldn't fit, I searched and searched before I came up with my design. You even rotated the pipe, not sure how that worked out with the compound angle the flange is on from factory. Mark44

w like this on the inside 5/8" thick.

No I cut the piece of flat nylon the same profile of the back of the ski chime and just above. Mark44

Here you go read this. http://www.x-h2o.com/threads/39846 Mark44

t I installed 5/8" thick nylon with epoxy on the inside of the hull to accept 1/4" NPT tap and installed brass or SS pipe plugs.

I used epoxy resin with filler for the small dings. Mark44

Check in the tech section for proper carb. tuning sequence with a tachometer. Mark44