Search results

What I have seen some guys do is remove the steering plate, cut it off, then use the old clamps and redrill the plate and tap it for straight handlebars , it puts you about three inches farther forward without messing with the handlepole or the steering cable , if you don't like it you will...

225 shouldn't be too big for a 750 hull try different riding positions in the tray, most of the 650 -750SX hulls liked for you to be farther forward in the tray.

The STS is purring like a kitten, she ain't all that purdy but chrome won't get you home . I did do a repaint -returf and new graphics on the hood-upper cowling last year , i haven't gotten around to stitching up a new seat cover and handlebar cover yet. I need to do those, footwell pads and...

I worked on a GP 800 last year , the dude ran electric fence wire for the trim cable , I replaced the pump assy because the wear ring was toast and I had the carbs off repairing them, he started raising hell about something and I put the carbs back on it and told him to come get it and BTW you...

Just working on my stuff today , firing off a 97 GTX sales ski I got last year and I just rebuilt the starter solenoid on my STS 750 personal ski , we are going riding later today , screw this working stuff, I have to say these solenoids are great , Kawasaki got at least one thing right on...

I do know that XFT built some Nomex honeycomb carbon fiber skis , one has appeared here for sale several times since Charles sold it.

I pulled an eggplant, it's not huge like the ones in the store, I have been informed that the younger eggplants are much sweeter than the bigger ones , at any rate Coolianos, stuffed bell pepper, grilled eggplant and BBQ boneless pork chops are grillin while I am chillin.

Gotcha

So is this the same coating that is used on drill bits ?

thanks

If the flywheel goes on it will seat itself when you tighten down the flywheel bolt

down always , yes put the key in the crank and then put the flywheel on , I have on occasion when dealing with a sloppy fit on the key used a drop of superglue to hold the key in place while you put the flywheel back on.

I believe the idea behind the Coremat is it creates basically an I beam between the layers of glass , carbon or whatever. The expanded PVC is basically very closed cell foam board , the shiny finish on it has to be sanded with at least 80 grit to create some tooth but I have repaired many...

I have seen a lot of them with UHMW screwed to the bottom of them so they can just glide over most anything without damaging the boat.

I already have a micro mini boat I am building out of a Kawasaki TS that blew up, literally , the nut for the fuel pickups got loose the customer hit the start button and boom it blew them off the ski, luckily no one was injured when it happened . It separated the hull and the deck, I pulled...

I have always wondered about using expanded PVC , it's thermoformable , it gules up with epoxy really well also , I use it a lot in repairs or when customizing a ski , especially like it for repairing bond rails or building a whole new bond rail like I did on the Superjet build .

Define expensive it's $5.85 a yard at USCOMPOSITES.COm , that's for a 60 inch by 36 inch piece, how cheap do you need it to be ?

Battery is in , it fired up , it sounds good and the oil pump is working so it should be good to go tomorrow afternoon so they can tear it up on the 4th ,, have a happy 4th !

I had everything here except for an exhaust gasket , it's ok though I had a 1200 gasket and tin snips which means I have 800 exhaust gaskets lol. Other than putting gas and a battery back in it , it's done , I will probably fire it off today and water test it tomorrow , then I am done for the...